|
Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to drain Pampera coolant
Hi,
Unlike the EC, there's no Service manual on-line for the Pampera 250 2-stroke (mine's a 2002 mk3). So, please can someone tell me how to drain the coolant ? The EC has a drain hole on the pump-cover, but the Pampera doesn't. Do I take the whole water pump cover off ? This seems logical, but I don't recall doing this before (it's been a loooong while, as the bike wasn't used for years) and I'm nervous about needing a new rubber seal for the cover as Pampera spares are not easy to get these days. Thanks for any help, Mike in the UK |
#2
|
|||
|
|||
Instead of disturbing the cover, what about removing the lowest rad hose connection and leaning the bike over to get the coolant out?
__________________
2011 EC250E |
#3
|
||||
|
||||
The Pampera has a trials motor. I just looked at my 01 TXT 280 and it is a Phillips screw just behind the front bolt on the cover.
Can you post a pic. ?
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#4
|
|||
|
|||
Those connections are crimped on, one-time use. Best left alone...
|
#5
|
|||
|
|||
The Pampera pump cover has 2 allen key bolts. Nothing else. I guess I just remove it...
|
Tags |
coolant, drain, pampera |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
oil drain washer | kyton | Enduro Engine - 2 stroke | 12 | 09-10-2016 02:34 PM |
Best Way to Drain Out Gas | VTMTcowboy | Enduro Engine - 2 stroke | 4 | 05-10-2016 02:05 PM |
Coolant drain | Buysomerice | Enduro Engine - 2 stroke | 2 | 10-06-2014 05:52 PM |
First coolant change - $#%+ In coolant?? | Why Z? | Enduro Chassis & Body | 10 | 06-26-2014 03:32 PM |
Coolant drain bolt | Lonestar4x4 | Enduro Engine - 2 stroke | 7 | 05-24-2012 08:13 AM |