|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
help which 2011 would be my best choice
Hello Im looking to buy a second gas gas bike, I have a 2013 EC300 and it is a great bike. Now Im looking for a 2011 model, I would like to try the older platform. I really wanted another 300 but in searching I have found a new 2011 XC250 race and the Replica Cervantes 250 model, I guess I could put a 300 kit on either of them or maybe just be happy with them being a 250?
Also have a lead on a new 2011 six days 300, this was my first choice but I am waiting to hear from the seller. Thanks for any information on the above models and how much you like them Steve. |
#2
|
|||
|
|||
I had an '11 300 and as others have found, liked it much better in the tight single track that is, by preference, half or more of my riding. Didn't get along with the feel of the new frame, don't know if it was length, height or what, it just didn't work for me. I looked at that Cervantes pretty hard, very very cool bike. Has never been started and I even went so far as to talk to Mark about swapping the 250 stuff, S3 head and all, for stock 300 stuff, wouldn't cost too much at all if that was what you wanted to do. The deciding factor, however, was the bike, shipping, and 300 parts brought it within $100 of a new byob Beta 300... Which I love everything about.
|
#3
|
|||
|
|||
Look for the new '11 Six Day 300 talked about here and if it's not way cheaper than the Cervantes just get the replica, put the 300 head on it, and have one of the most trick bikes here. You very well might like it better than your new frame one.
|
#4
|
|||
|
|||
2011 Race
The 48mm Zoke forks are the difference. |
#5
|
|||
|
|||
Cervantes,way too many nice parts too pass up.i would keep it as a 250 as well,you will likely be converted after a couple rides.
Add up the wheels ,brakes ,triples stainless pipe and ti pegs .ttx and revised rear rocker. |
#6
|
|||
|
|||
|
#7
|
||||
|
||||
Cervantes, all the way. A great bike at the right price.
|
#8
|
|||
|
|||
Thanks for the replies, I went with the Nambotin 2011 model six days, I will more then likely race a few enduros with the bike , But my son and I and friends mostly trail ride here in southern Oregon, lots of steep and wooded terrain From what I have read the 45 zokes can be worked with if need be, rest of the bike I think will be good to go. The Cervantes was way cool with lots of great gear and lots if bling, but I like my 2013 300 so much I really wanted another 300. I will get photos and ride info posted as we have a few great outings planned for this summer.
Thanks again for your advive. Steve. |
#9
|
|||
|
|||
Well just to add to my posting above, the dealer stated that it is a Nambotin 2011, I have not found any other photos of 2010 or 2011 bikes that look like it, Also there is a lot of 2010 decals on it, if anyone has more information about this bike year and model, I would be very interested.
Thanks, Steve. |
#10
|
||||
|
||||
Thats the 6 days.
I personally would have gone for the 2011 R or Cervantes for the forks alone. The CC design is worlds ahead of an OC. Plus almost everyone with 2011's couldn't find peace with the 45mm's. Just look at the number of KYB/Showa conversion threads popping up. Between the R model and the Cervantes it'd have come down to price for me, but probably would have gone higher specs. Anyway, if push comes to shove you might be able to take the whole triple clamp and fork setup off the 2013 and back on the 2011. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 EC250 graphics fit 2011 EC300? | Jarvo_325 | Enduro Chassis & Body | 2 | 11-25-2012 06:28 PM |
Help with my choice 2011 or 2013 EC300 | rocky2by | General Discussions & Announcements | 13 | 09-13-2012 12:15 PM |
needle choice | cascade_crawler | Enduro Intake/Carburetion - 2 stroke | 13 | 01-22-2012 07:35 PM |
MICHELIN recreationnal/leisure tire choice? | ruca | Enduro Other... | 4 | 06-21-2011 01:35 PM |