![]() |
|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Does anyone know the specs of the above? I have a lot of play in mine and it wants replacing
![]()
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#2
|
||||
|
||||
![]()
https://medias.schaeffler.us/en/prod...12-pw/p/347222
Not sure if this is what your after, but fitted on my lower shock on my 2013.... |
#3
|
|||
|
|||
![]()
This on the top shock mount of 2006 ohlins.
I've taken it out, ID 14 OD 26 Width1 12.75 Width2 15 Found nothing yet...
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 Last edited by motopsycho87; 08-02-2022 at 11:52 AM. |
#4
|
|||
|
|||
![]()
Found it
OHLINS REAR SHOCK BEARING - LARGE 14X26X15 Bearing dimensions: Outer Diameter 26mm Inner Diameter 14mm Inner width 15mm Outer width 12.75mm Also Fits the 1999 Beta Techno, the Beta Rev 80, Beta Evo80 and the Beta Rev 3 from 2000 to 2008 with the Paioli rear shock. https://www.splatshop.co.uk/ohlins-r...ing-large.html
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB Rear shock EC300 2006. | masterbill | "Wanted to Buy" & "Want To Trade" | 13 | 02-24-2018 03:02 AM |
Exhaust joint | Toshy | Enduro Engine - 2 stroke | 4 | 09-29-2016 06:40 PM |
Big Boy Spring for 2006 Ohlins Shock | HooliKen | Enduro Suspension | 8 | 01-16-2016 03:23 PM |
Sachs Shock Bump Stop Dimensions | Jakobi | Enduro Suspension | 3 | 05-21-2015 05:11 AM |
mild pain on the left hip joint | moonlight429 | Injury & Recovery | 2 | 10-11-2007 11:33 AM |