|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Linkage/swingarm bearing source needed
Went to pickup my cageless linkage/swingarm bearing today and they were caged :-(, local bearing house says they cannot get me cageless bearings in that size 22x28x16. The number I found searching this forum is 22BM2816, can anyone confirm if this is the correct? The bearings were Koyo brand, and they called their distributor who said the 22BM2816 is a "manufacture only" part#(meaning-they only sell to Gas Gas). Where are you guy's finding your 22x28x16 cageless needle bearings?
I'm a stickler for details and IMO if the bike came with cageless bearings that lasted this long (it's on my sons 02' xc250) than that's would should go back in it.
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
#2
|
||||
|
||||
The stock Koyo bearings seem to be special OEM bearings. I could not get them from Motion Industries.
What I ended up doing for my lower shock bearing was order the Pivot Works kit.
__________________
2004 GasGas DE250 |
#3
|
||||
|
||||
|
#4
|
||||
|
||||
Yes eff, Motion Industries is where I was told they were a "manufacturer only" item. Called Koyo and they gave me a phone# for a different distributor near my area
Thanks for the link bergerhag! That's gives me another mfg. and another part # to search for, hoping to find a source just a little closer to me than France for 11 "drawn cup full complement needle roller bearing's".
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
#5
|
|||
|
|||
I just bought this set, and then looked in my box of spares and saw that I had two identical sets of linkage bearings on hand already. I paid $75 for these, make me an offer if you're interested. ImageUploadedByTapatalk1444257212.151586.jpg
__________________
Trevor 007 Honda XR650R 05 Gas Gas EC 250 04 Sherco 2.9 trials bike 00 Aprilia Caponord ETV 1000 93 Kawasaki KLX 650 |
#6
|
||||
|
||||
Thank you petroburner for the offer but, already gave up and have a pivot works/made in china bearing kit on the way so I can button this thing back up for now.
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swingarm and Linkage Bearings | blitz11 | Enduro Chassis & Body | 34 | 01-12-2015 03:41 PM |
2012 EC300 linkage and swingarm bearing kit | VxZeroKnots | Enduro Suspension | 2 | 03-26-2014 05:28 PM |
Quick swingarm/linkage bearing change question | motogroove | Enduro Suspension | 6 | 05-16-2011 12:58 PM |
Swingarm linkage/bearing kits | gasIdaho | Enduro Suspension | 1 | 02-03-2009 01:29 PM |