Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke
Reload this Page Water pump drain bolt
Register FAQ Calendar

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
Page 2 of 2 1 2
 
Thread Tools Display Modes
  #11  
Old 05-26-2019, 01:14 AM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
  
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,071
Default
Thanks mate I'm thinking of writing an antipodean manual for our bikes. Main tool 3lb hammer (must metricise that). . with a decent length of no.8

Here's what I'm drinking. Can says its exported over there. Do try find some. You wont be disappointed. 2 Kiwi and 2 Aussie Hops. Nice.

Been out riding today. Mint.
Attached Images
File Type: jpg 20190526_180958.jpg (126.9 KB, 12 views)


__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote


  #12  
Old 05-26-2019, 01:26 AM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
  
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,071
Default
Pic didn't copy try again.
Attached Images
File Type: jpg 20190526_122752.jpg (118.9 KB, 11 views)
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #13  
Old 05-26-2019, 03:11 AM
gg3's Avatar
gg3 gg3 is offline
Silver Level Site Supporter
  
Join Date: Apr 2007
Location: BOP,New Zealand
Posts: 587
Default
Quote:
Originally Posted by (F5) View Post
Thanks mate I'm thinking of writing an antipodean manual for our bikes. Main tool 3lb hammer (must metricise that). . with a decent length of no.8

Here's what I'm drinking. Can says its exported over there. Do try find some. You wont be disappointed. 2 Kiwi and 2 Aussie Hops. Nice.

Been out riding today. Mint.
F5,How about an NZ tool exchange site?
I have a phillips screwdriver that doubles as a punch & bearing extraction tool.
I heard of a guy in Auckland that has nearly a full socket set!Just missing the M8 & M12 & the ratchet only works one way.
Reply With Quote
  #14  
Old 05-26-2019, 03:59 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
  
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default
You're drinking trans beer? f%!!5!!
Reply With Quote
  #15  
Old 05-26-2019, 07:05 AM
shawbagga's Avatar
shawbagga shawbagga is offline
Senior Member
  
Join Date: Feb 2012
Location: West Straya
Posts: 225
Default
Quote:
Originally Posted by gg3 View Post
F5,How about an NZ tool exchange site?
I have a phillips screwdriver that doubles as a punch & bearing extraction tool.
I heard of a guy in Auckland that has nearly a full socket set!Just missing the M8 & M12 & the ratchet only works one way.
I call BS. It's always the 10mm socket that goes AWOL!
__________________
'18 Gasgas XC250
Reply With Quote
  #16  
Old 05-26-2019, 01:55 PM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
  
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,071
Default
Oh gawd. Is it Monday already?
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #17  
Old 05-27-2019, 04:56 AM
gg3's Avatar
gg3 gg3 is offline
Silver Level Site Supporter
  
Join Date: Apr 2007
Location: BOP,New Zealand
Posts: 587
Default
Quote:
Originally Posted by shawbagga View Post
I call BS. It's always the 10mm socket that goes AWOL!
They make 10mm sockets?
F5 is on to something,a trans beer gives us 4 more hours drinking time!
Reply With Quote
  #18  
Old 06-01-2019, 03:20 AM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
  
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,071
Default
Well I've been on the Behemoth again , including a Transtasmin. Its spectacular. Then on to Marlborough savs. Just fantastic.

Drain bolts you say?
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #19  
Old 06-01-2019, 03:38 AM
rodent's Avatar
rodent rodent is offline
Senior Member
  
Join Date: May 2019
Location: Sunbury, Australia
Posts: 187
Default
Maybe a Dowty seal(bonded) the correct size would work?
Reply With Quote
  #20  
Old 06-04-2019, 12:55 PM
opm22 opm22 is offline
Member
  
Join Date: May 2019
Location: Brazil
Posts: 5
Default
Quote:
Originally Posted by gasgasman View Post
I use part of the power valve cover gasket. Just cut around one of the bolt holes.
I use a very similar soft material. Just a little torque on the drain bolt and never leaked.
Reply With Quote
Reply
Page 2 of 2 1 2



« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Coolant doesn?t drain from drain bolt? 2012 250 ec Si176 Enduro Other... 4 11-19-2017 11:03 PM
Coolant drain bolt Lonestar4x4 Enduro Engine - 2 stroke 7 05-24-2012 08:13 AM
oil drain bolt in case jyellard Enduro Engine - 2 stroke 11 10-13-2009 04:39 AM
oil drain bolt crossover ? Brian VT Enduro Engine - 2 stroke 6 08-04-2009 08:11 PM
water pump? nhrider Enduro Engine - 2 stroke 17 12-21-2008 12:05 AM




All times are GMT -5. The time now is 01:10 AM.

Contact Us - GasGasRider.org - Top

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org