GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > General Forums > Riding Techniques & Training

Riding Techniques & Training Increase Riding Skill, Physical and Mental Training, Weight Loss.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-13-2017, 12:27 AM
swazi_matt swazi_matt is offline
Senior Member
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 1,951

Originally Posted by Jim Cook View Post
Since your weight will have shifted forward from dragging the front brake and already loaded the front tire, the tire will bite as you gas it and turn. But, you need to hit the gas as you are letting off the brake, just as you start to "throw" the bars. (tight woods tree dodging)
Do it in "slow motion" first, to get the timing down.
My natural inclination is to slow down, turn, and gas it. That is not the fast way. It turns much better under power, when I slow down, gas it, and turn.

Let me know how it works for you.

Set up a figure8 track and work on getting your technique programmed into your muscle memory. As Graham Jarvis says you need to know slow to go fast (or something like that)

If you compare dirt biking with golf (or another sport where technique counts for more than talent/ fitness) you will note that they spend a lot of time around the putting green or driving range whereas most of us just want to head to the hills. If you can be dedicated and spend an hour doing technique drills for your cornering, balance wheeling etc you will get better and continue riding well into the balding grey years
2010 ec 300
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Grip heaters on 2K-2 thejackrabbit Enduro Electrical & Wiring 4 01-19-2014 08:50 AM
Vapour Engine Temp and RPM Limit values? Hicksi Enduro Electrical & Wiring 1 12-20-2012 03:38 PM
Pistons worn out limit motohellrider Enduro Engine - 2 stroke 9 11-20-2011 08:22 PM
Stupid Question? Rev Limit? Jakobi Enduro Intake/Carburetion - 2 stroke 5 11-13-2010 06:36 AM
300 EC RPM limit? Hollywood Enduro Engine - 2 stroke 9 09-10-2008 08:59 AM

All times are GMT -5. The time now is 12:47 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 -