2014 XC250 rear wheel bearings

[Blakelpd5]

I am finding so many different options. Some lots have 3 bearings, some have two, all are different sizes. I believe 13-14 share the same bearings but no other years?

Does anyone have a solid answer on what I need? Sizes or part numbers?

[PFD023]

Originally Posted by Blakelpd5

I am finding so many different options. Some lots have 3 bearings, some have two, all are different sizes. I believe 13-14 share the same bearings but no other years?

Does anyone have a solid answer on what I need? Sizes or part numbers?

Here's your answer.....http://partsfinder.onlinemicrofiche....20REAR%20WHEEL

Take the bearing numbers and do yourself a favour....buy quality Japanese bearings....NSK, NTN, KYB. Any shop selling Japanese bearings will be able to match the bearing based on the above parts fiche.

[hamilton]

03-15 rear are all the same wheel bearings, 3 bearings 6004x2 6005x1
You can go cheap or better quality, I go cheap in the winter slop.

https://www.ebay.com/itm/New-Connect...53.m1438.l2649


https://www.gasgaspartsguy.com/WHEEL...talogId=-15678

careful you don't damage the step washer and alum spacer between bearings.

[Zman]

To get longer bearing life, I use one of these grease gun needles to fill the bearing with marine grease. If you are careful you an slip the point under the seal by the inner race. I arrange the bearing so that seal is located on the inside of the hub.

https://www.ebay.com/p/Plews-05-037-...d=282444820630