Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #161  
Old 04-25-2023, 08:10 PM
gg3's Avatar
gg3 gg3 is offline
Silver Level Site Supporter
 
Join Date: Apr 2007
Location: BOP,New Zealand
Posts: 587
Default 2018 xc300 starter update

Update on the POS starter. Previous work-
All cables upgraded.
AS3 bendix cover with allen head bolts & thicker gasket.
New bendix with lighter spring modification.
Converted to a 24v system(x2 Li-ion batteries).
Wet modification.
This worked most of the time, especially once at full operating temp.
But it let me down recently. So did some checks & the bendix was still binding.
So reduced the shaft on each end of the bendix so I could fit a teflon coated copper bush in the bendix shaft housing at each end.
Spent a day riding & it spins up better than it ever has(so far).


Reply With Quote


  #162  
Old 04-26-2023, 02:51 AM
Aaron B Aaron B is offline
Member
 
Join Date: Aug 2021
Location: Australia
Posts: 4
Default

So how much time and money did that soak up??

Mine was about $1100 in total BUT it's been working a treat!
__________________
Newbie
2018 EC300
Reply With Quote
  #163  
Old 04-26-2023, 02:57 AM
gg3's Avatar
gg3 gg3 is offline
Silver Level Site Supporter
 
Join Date: Apr 2007
Location: BOP,New Zealand
Posts: 587
Default

Would be about the same.Lost track of the hours spent on it.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 Batteries and Starter Doesnt work! markwoodlief Enduro Electrical & Wiring 81 11-30-2017 03:50 PM
2018 Starter Delete nhgas Enduro Electrical & Wiring 1 11-10-2017 07:58 PM
45mm zoke continued Mark Berg - CPD Enduro Suspension 0 04-05-2011 04:10 PM




All times are GMT -5. The time now is 11:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org