|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
What's your opinion on "lift" stands
Up to now, I have been using my perfect 17" height and low-priced plastic Rubbermaid 2-step stool that I bought at Lowe's for about $10 (See Below). I see all of these ads for "lift" stands costing anywhere from $50 to $100. Some are overpriced (ok most), while others are scary to be called a lift stand. I have held off buying one these because it is hard to justify the expense. However, lifting the bike up easily is very appealing for maintenance items.
Some examples that I have been looking at: Motorsports P12 lift stand FMF lift stand MSR Pro-lift stand Excel Moto-X Lift stand Ocelot Pro lift II stand (from Chapparal) Tusk lift stand (from RockyMountain) Sears ATV/bike lift (heavy but ok for garage use) Do you use a lift stand and what brand? What are the pros/cons? Any homemade ideas not requiring welding? It would have to be wood or metal bolted together. Here is a pic of my Rubbermaid stand: EDIT: My plastic stand is made by Costco (not Rubbermaid). The height is 17" with a top surface of 12"x10" (12" is side-to-side width). Also, I riveted a small section of rubber mat to the top surface to keep my bike from slipping. They claim a max load limit of 250 lbs. Here is a link to Lowe's. This is a newer version sold by them, but it is very similar. http://www.lowes.com/lowes/lkn?actio...-12&lpage=none
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 Last edited by MattR; 08-09-2006 at 06:05 PM. |
#2
|
||||
|
||||
I like your stand. The first time I saw that photo I thought I might get one too.
|
#3
|
||||
|
||||
I use and sell these http://www.teamhawgracing.com/ Its great not having to bend over to work on things.
|
#4
|
|||
|
|||
I use a fixed stand, somewhat like Matt's, for minor work. For bigger jobs I have one of the Sears atv/motorcycle lift stands. The Sears unit is quite solidly built and has two feet that can be screwed down to make contact with the floor - it is very stable. When not in use it fits under the bike.
|
#5
|
||||
|
||||
this was my first stand,its the ash can for my fireplace
|
#6
|
|||
|
|||
Quote:
Thank you, Ron |
#7
|
||||
|
||||
Quote:
I think Dave is referring to this Sears ATV/Bike lift. This is one that I was also considering. It is a nice lift for $70 but the weight makes it for home use only (approx. 100 lbs). Here is a link to Sears: http://www.sears.com/sr/javasr/produ...seBVCookie=Yes It is Sears item #00950190000 Mfr. model #34612 (in case link does not work)
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#8
|
||||
|
||||
For the GasGas I use a very old stand I've had since the '80s. It has a wide base and is very sturdy. Its also open in the center so its great for oil changes, you can fit a bucket underneath. When I got the VRod, I needed a lift(no picking that thing up by hand) so I bought the Sears lift. I got the aluminum frame one, not the steel one pictured above. Its low enough to slip under the VRod and with the pad extentions, works fine on the GG. Not quite as solid as a fixed stand though, as there is some flex in the system when extended. Its fine for oil changes on the VRod, but anything more where your torquing on the bike I'll strap it down. If I'm going to do any serious work on the GG like wheels or fork work, I'll use the fixed stand. I also store the bike on the fixed stand. The aluminum Sears lift is nice because its compact and stores under my workbench, important when you have 4 bikes, 2 workbenches and other stuff in a single garage.
|
#9
|
|||
|
|||
lift stands
i use the sears atv/mc stand. my bikes are 4t's and heavier so now i don't have to worry about getting a hernia. plus i can roll it out side to work on my bikes if it's nice out. it also has tiedown anchors to stabilize your bike if u really need to reaf on it. it surprisingly doesn't take up much room either. it'll kinda slide under/over stuff and out of the way.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#10
|
|||
|
|||
I have a couple of neat wooden stands that my father made for me back in the early 80's. They remind me of something from the GP circuit back in 1980 or '81 - propping up a works Maico or something. I think they have a retro cool look, especially with the patina of age and use.
Another simple stand I use is one made from simple square tubing. It is a metal square that sits under the bike's frame near the footpegs with a tube welded perpendicular to that square frame. The end of that long tube has a short leg perpendicular to that that sits on the ground near the rear axle of the bike. You simply rock the stand back with the long tube and it levers the bike up and back. Great for keeping bikes vertical to take up less space in the shop, and for some quick maintenance, it works fine. I'll try to snap some pictures. Jerry
__________________
"Conviction is a luxury of those on the sidelines." '13 Beta 300RR - race bike '02 GG300XC - "Billie Baroo" '01 DR650 '02 GG 280 Pro '06 YZ 250 '07 WR450 '00 TT125RL '94 YZ200 - custom keeper |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
"attn." "new England Boys" | RONALD BRUNDIGE | General Discussions & Announcements | 9 | 11-17-2008 08:19 PM |
"B" piston in an "A" bore? | Kokanee | Enduro Engine - 2 stroke | 6 | 09-04-2006 07:10 PM |
Recommendation: add "Injury/Recover" and "Riding Techniques" sections | MattR | Suggestion Box | 2 | 07-18-2006 09:19 PM |