Interchangable rocker arm

[FreakyFish]

Hi,

Hope someone can help!

I recently acquired a 200 ec '06 model and have discovered that the Rocker Arm where the shock mounts to is total destroyed, any bushing/bearings that was in there are all in pieces and this has caused the hole in the rocker to become ovel in shape. I don't hold much hope trying to get this repaired... I was wondering if this http://cgi.ebay.co.uk/Gas-Gas-EC-125...item1c15ad677c would fit? I searched the gas gas es site and can't even find a manual for a 125 ec 2000 model. The Linkage repair kits you can get cover both these models with the same set so surely they must be the same?

thanks

[gasser]

I don't know if they are all the same but I do have an extra rocker that will fit the older bikes. Where are you located?

[GMP]

They should all be the same. 125 has 1mm longer pull rods, thats all.

[FreakyFish]

Thanks for your replies! This is good news.. I live in the UK so would probably cost a small fortune to post, but thanks anyway much appreciated

[HenrikSchmidt]

Rebore the rocker arm and press in a steel bushing. I did that on mine and it works great..