|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Thanks for the info
Also found this Rooster on U tube https://www.youtube.com/watch?v=lu3T-ctnzKY Seems simple enough....but yeah I wont go "like a bull at a gate" . The clutch cover is billet and made by Force Accessories: https://www.forceaccessories.com.au/ i have used their stuff on other bikes , well made and good customer service
__________________
2019 EC 300 |
#22
|
||||
|
||||
Page 66...
https://gasgas.com/index.php?mact=CG...template=false Thanks for the page reference , have this manual and searched it ...just never thought to look under "Centrifugal external adjustment system"....LOL ....only in Spain!
__________________
2019 EC 300 |
#23
|
||||
|
||||
Quote:
Yeah haha, different wording. |
#24
|
||||
|
||||
[QUOTE=MotoHead;194763]Thanks! Didn't see this on their site but maybe they just haven't updated it yet.
Yeah , not on their web site . You have to call them - ask for Daniel Holt PS I'm not affiliated / don't work for this company - just want to give them a good rap fro their products and services!
__________________
2019 EC 300 |
#25
|
||||
|
||||
Rode it about 10 km around the neighbourhood the jetting is crap! Smooth enough until you give it a handful from steady throttle then it bogs down.
The shop was supposed to have fixed the jetting as part of the PDI , told me they were fitting a NECH needle which would provide a good result! It will be heading back to the shop for them to sort it![/QUOTE] Had all sorts of excuses from the dealer as to why it was running like crap (all my fault of course) and they would not come and collect the bike to sort it.... Ended up telling them I was bringing it in myself and I wouldn't be back to get it til it was running correctly. They called me back the next day after i dropped it off ....they had left one of the restrictors in the air box ...hence the crap running! They will be dropping it back next week.....we'll see if that's fixed it!
__________________
2019 EC 300 |
#26
|
|||
|
|||
That happened to me also, found the restriction when taking of the air filter. It really spoils the power when wot
|
#27
|
||||
|
||||
Quote:
I believe my bike still has that plastic piece of shit in the air cleaner, what's it look like? That said, my bike runs fine As for the shit running, mine ran like a turd from new. the culprit was a poorly adjusted power valve |
#28
|
||||
|
||||
Thanks for the replies.
Glad to hear it is not just my bike . According to the dealer this was "a new restrictor we have never see on this model before" LOL I'll see if they can bring it when they drop the bike back so I can post a pic! I took your advice a few posts back Rodent and tried adjusting the power valve (Just knocked it back from 2 turns out to 1.5 turns). Did not change the shit running. What was the problem with the adjustment of your power valve and how did you fix it? Thanks
__________________
2019 EC 300 |
#29
|
||||
|
||||
Quote:
Mine is set at 2 1/4 turns CCW. Centrifugal external adjustment system Adjustment of the pre-loading of the centrifugal spring Dismantling and adjustment: 1. Remove the plug (1) with a 27mm wrench. 2. Secure the adjustment screw (2) with a 2.5mm Allen key and loosen the locknut (3) with a 6mm angled spanner. 3. Tighten the screw (CW) (2) to the bottom and then tighten(CCW) according to the recommendation table. Assembly: 1. Secure the rotation of the adjustment screw (2) with a 2.5mm Allen key and tighten the locknut (3) with a 6mm angled spanner in order to lock the adjustment system. 2. Ensure the correct positioning and condition of the copper gasket (4) replace the plug (1) and tighten with a 27mm spanner and a maximum torque of 25Nm. Adjustment Pre-load value (mm) Site conditions or circuit type Engine performance. 1 turn 14.2 (250/300) No grip (snow or mud) Power and RPM limitation. 1.5 turn 14.6 (250/300) Difficult grip or technical circuit Smooth power delivery 2 turns(standard) 15 (250/300) Correct grip or combination circuit Optimum/standard 2.5 turns 15.4 (250/300) Fast circuit Live engine 3 turns 15.8 (200/250/300) Very fast circuit Low torque at low RPM and aggressive engine |
#30
|
||||
|
||||
Got it , thanks for the info!
__________________
2019 EC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GNCC - The General - Washington, GA | SS109 | Off Road Racer's Corner | 0 | 03-19-2018 03:24 PM |
Gas Gas 200/ General 200 info | Clay | General Discussions & Announcements | 40 | 05-03-2013 08:50 PM |
Looking for GENERAL tire advice, what kind of compound? | brider | Enduro Chassis & Body | 3 | 01-15-2013 05:07 PM |
General update on my 450 FSE | cal_tony | Enduro Engine 4 stroke (including EFI & Exhaust) | 7 | 12-10-2008 10:58 AM |
04 gg200 / general gg questions | Blowtus | General Discussions & Announcements | 0 | 07-27-2007 06:35 AM |