|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Foot pegs.
I had a fairly good idea this might happen when I saw there was a clearance issue with Fastway pegs on the right side. I ground the corner down some but if you look close you can see the lip bent in from hitting the bolt today. It's hard to tell from the picture but the whole peg assembly is distorted. I was lucky I didn't damage the frame worse than I did.
Any pegs around that will clear the brake pedal assembly and not cause this on a big rock hit again ( I ride really tough rocky trails)?
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300 |
#2
|
|||
|
|||
I just put some IMS Pro Series pegs on my EC200 and they seems to clear when totally folded. They have a large clearance recess in that spot.
|
#3
|
||||
|
||||
What bike did you get them for? GasGas isn't listed. I'm assuming KTM.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300 |
#4
|
||||
|
||||
YZ foot pegs.
|
#5
|
||||
|
||||
|
#6
|
||||
|
||||
My Fastways were for a KTM and fit fine. Interesting the YZ is a direct replacement.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300 |
#7
|
||||
|
||||
I remember having to grind the corner on the fastway pegs made for a YZ - to fit on my '01 gasgas...
jeff
__________________
|
#8
|
|||
|
|||
X2, ground quite a bit too!!!
|
#9
|
|||
|
|||
Gas Gas is listed on Imsproducts.com. The box that mine came in also lists 97+ YZ125/250, as well as several other Yamahas and GasGas.
|
#10
|
||||
|
||||
A die grinder is your friend with Fastway pegs. Remove peg material (where it contacts the brake pedal) until the peg stop can hit the frame and not the peg hitting the brake pedal.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fastway Air Foot Pegs and Mount Kit | grich300 | Parts | 0 | 12-08-2013 02:26 PM |
08 250 DE with KLX110/CRF50 foot pegs | five21racing | Enduro Other... | 4 | 01-28-2009 08:58 PM |