Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > Mini Gasser 's Corner

Mini Gasser 's Corner GasGas Mini Bike Forum. EC Boy Heaven.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-07-2011, 10:10 PM
unitedrider unitedrider is offline
Member
 
Join Date: Apr 2011
Posts: 8
Default 2002 Sm50 Parts Crossover

I have a 2002 Gasgas Sm 50 that is giving me a hard time finding a crankshaft assembly I have been doing some research and found that the motor is a Franco Morini motor witch is made in Italy it looks very similar to the Ktm 65 engine does anyone know if I would be able to use the crankshaft out of a KTM 65 or any other bikes that share the same motor,or where I could find a crankshaft I am also having a hard time finding a repair manual or service manual any help would be great!


Reply With Quote


  #2  
Old 08-07-2011, 10:13 PM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

herdan corp has all the franco morini parts.
as does http://www.morinifrancousa.com/models.htm (you can go here and identify it - i'm betting it's an s6 motor)
__________________
07 ec300
was 00 xc200 now a 00 xc300. now parting out.
99 ec300 (now a pile of parts which are for sale)

Stainless Cycle - Motorcycle Bolt Kits
www.stainlesscycle.com
Reply With Quote
  #3  
Old 08-08-2011, 10:17 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 435
Default

Does your motor look like the one shown here?:
http://www.gasgasrider.org/forum/sho...?t=2228&page=2
I have been looking for a source of 70-80cc big bore kit for quite
some time.
Let us know what you find.
Jeff
Reply With Quote
  #4  
Old 08-08-2011, 06:12 PM
unitedrider unitedrider is offline
Member
 
Join Date: Apr 2011
Posts: 8
Default

It's definitely the Gasgas motor not the Derbi motor I have called and talked to several people including Jim Snell from rising sun he told me to contact Herdan.com witch is a Franco Morini importer as well as Morini Franco USA and still have had no luck I guess its almost impossible to find a source of parts and knowledge for this particular motor
Reply With Quote
  #5  
Old 08-09-2011, 10:35 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 435
Default

If you read French I found a couple of forums that mention
the SM50 GasGas.
You might try these folks.
http://www.treatland.tv/new-puch-peu...parts-s/88.htm
They seem to stock some odd Euro bike parts and they may be able to
find what you are looking for.
I plan to check with them one of these days myself.
Jeff
Reply With Quote
  #6  
Old 08-09-2011, 09:26 PM
unitedrider unitedrider is offline
Member
 
Join Date: Apr 2011
Posts: 8
Default

I went to treetland.tv and called the phone number they said they have no parts for the gasgas Franco Morini motor
Reply With Quote
  #7  
Old 08-09-2011, 09:34 PM
unitedrider unitedrider is offline
Member
 
Join Date: Apr 2011
Posts: 8
Default

I'm thinking that it will be a lot easier to just install another motor I've been looking at the KTM 65cc engine has anyone tried to fabricate a motor to fit into the chassis any recommendations on what motor would be the best fit
Reply With Quote
Reply

Tags
sm50 parts



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another Parts Crossover Question carlg Enduro Chassis & Body 1 11-29-2010 12:37 AM
EC200 parts crossover rupecopp Enduro Other... 7 10-20-2008 09:27 PM
4-stroke parts crossover Motarded1 Enduro Engine 4 stroke (including EFI & Exhaust) 4 11-05-2007 02:07 PM
MC65 parts crossover? bergerhag General Discussions & Announcements 5 10-07-2007 10:16 AM
Parts Crossover idea Phattaff Suggestion Box 3 08-21-2006 06:43 PM




All times are GMT -5. The time now is 12:11 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org