|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Motion Pro Rim Locks
I'm looking to replace my stock rim locks on the next tire change. I heard the MPro were the way to go. I'm not sure what size rim locks I should be getting for the front and rear wheel. I run 120/100x18 (rear) / 80/100x21(front). Choices are 1.6, 1.85, 2.15". Cheers
|
#2
|
||||
|
||||
I'm pretty sure it's the 2.15 in the rear.
Look at your rims, the size is stamped right on them. |
#3
|
|||
|
|||
The front is 1.6
The rear is 2.15 jeff |
#4
|
|||
|
|||
Do u guys run rimlocks on the front too?
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#5
|
||||
|
||||
I use a front wheel lock. hard braking can also make the tire spin on the rim if you don't use one.
|
#6
|
|||
|
|||
Anybody have experience with the "Tusk" Brand Rim Locks sold by Rocky Mtn ATV? They look just like the MP Rim Locks but are 1/2 the price.
|
#7
|
|||
|
|||
I'm not sure if their rimlocks are made by same outfit but other items are. They have great prices. They sure look identical to me. Maybe call them and ask.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#8
|
|||
|
|||
The tusk looks nearly identical to the Motion Pro.
Regardless of which brand you get, I strongly recommend grinding the sharp outside edges of the rimlock way back to create a nice radius on the edges. Every pinch flat I have had was due to the sharp edges of the rimlock. Since radiusing the edges of the rimlocks, I have not had a single pinch flat in years with Moose HD tubes.
__________________
Eric K '06 GasGas EC300 '01 GasGas XC300 |
#9
|
|||
|
|||
Thanks Eric. I will do this. Also, I ordered some Motion Pro rimlocks from GoFasters and was told to use the 2.15 for the front rim too. So that is what I ordered. Although the front rim says 1.6. Larger clamping area I guess?
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#10
|
|||
|
|||
I had a bad experience with a 2.15 rim lock in the front. The tube had 2 slits about 2 inches long from the rim lock since it protrudes much higher up.
I would NOT run a 2.15 rim lock in the front. I would only use the 1.6 in the front.
__________________
Eric K '06 GasGas EC300 '01 GasGas XC300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
motion pro nevada 200 2010 | oregon pampara rider | Ride Reports | 0 | 04-12-2010 11:12 AM |
nevada motion pro 200 | oregon pampara rider | Western United States | 0 | 03-01-2010 08:03 PM |
Motion pro for 07 ec300??? | wence | Enduro Engine - 2 stroke | 7 | 03-03-2009 08:34 AM |