Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old 10-17-2018, 03:53 AM
Fieds83 Fieds83 is offline
Member
 
Join Date: Jun 2018
Location: Adelaide, South Australia
Posts: 38
Default

Quote:
Originally Posted by Jakobi View Post
NECW#3 will put you right between the 2 settings. You could try a richer diameter like a H, bump up the pilot one more, or tweak the air screw to get some punch back off idle.

The thing is, these PWK carbs have no squirt jets like a 4T carb gets. If you snap the throttle on a 250F for instance, the carb says yep and pumps fuel straight down its throat to give it punch. On the 2 banger you either have to run rich enough to have the excess fuel available and live with some burbling, or have smoother delivery and compensate with some clutch use.
I was weighing up between the necw and nedw. Might be worth a try.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Revised Jetting Specs NEDW Jakobi Enduro Intake/Carburetion - 2 stroke 197 09-19-2014 08:17 AM
'06 EC300 stock handlebar specs? brider Enduro Chassis & Body 0 09-16-2013 03:08 PM
What is the stock 200 needle and jetting specs shaheeb Enduro Intake/Carburetion - 2 stroke 3 03-24-2012 10:56 PM
2010 EC300 Factory Jetting Specs - WTF? JP4 Enduro Intake/Carburetion - 2 stroke 197 07-04-2011 11:03 AM




All times are GMT -5. The time now is 03:31 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org