|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What is the stock 200 needle and jetting specs
Can anyone help me with the stock needle/clip and the pilot and main for a 2011 200?
I have too many needles and cant remember which one was stock! Enjoy the ride |
#2
|
||||
|
||||
N1EF I think #2
Unsure on pilot and main. Its listed in the manual/handbook |
#3
|
|||
|
|||
Thanks jacobi. tried the n8rh, it rips
|
#4
|
||||
|
||||
What clip pos?
I think that N8Rx is very similar taper to N3Ex, only a half a clip, or clip richer. IE N8RH#4 = N3EH#3.5/#3 (Can't confirm this, just a quick google turned it up) Update: Confirmed in Yamaha Manual N8RH (Rich) N3EH N8RW N3EW (Stock) N3CW N3EJ N3CJ (Lean) So judging from that I already know that N3C is half a clip leaner than N3E, so N8R will be half a clip richer. The last letter is the diameter richest to leanest H, W, J. FWW I've been running the N3CJ#2 in my 300. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Revised Jetting Specs NEDW | Jakobi | Enduro Intake/Carburetion - 2 stroke | 197 | 09-19-2014 08:17 AM |
2010 EC300 Factory Jetting Specs - WTF? | JP4 | Enduro Intake/Carburetion - 2 stroke | 197 | 07-04-2011 11:03 AM |
05 De 300 Specs | VORMAN | Enduro Electrical & Wiring | 9 | 11-14-2010 06:36 PM |
05 ec 300 stock jetting | randy | Enduro Intake/Carburetion - 2 stroke | 15 | 09-08-2010 06:53 PM |
200 06 stock jetting??? | thumpercb | Enduro Intake/Carburetion - 2 stroke | 9 | 12-18-2008 01:30 PM |