|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Kick starter is tight
After putting the clutch side cover back on ( the large cover, not just the round one), my kick starter feels tights and will not spring return. I loosened the cover and it felt looser, like normal, and would spring return. When I tightened the bolts again the kick starter was again stiff and will not spring return. I removed the cover again, ruining the gasket, and reinstalled and it is still tight when the bolts are tight.
When I ruinned the gasket, I reassembled using a liquid gasket sealant. Will this work as a permanent gasket? Should I just fill the fluids, run it for a while, and see if the kickstarter loosens itself up? Thanks for the help. Josh |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
kick starter help | jhendr3702 | Enduro Engine - 2 stroke | 13 | 12-09-2011 11:13 PM |
Kick Starter ? | rockrider1 | General Discussions & Announcements | 1 | 11-04-2010 08:49 AM |
07 250 Kick Starter | prk03 | Enduro Engine - 2 stroke | 2 | 03-28-2009 10:59 PM |
Kick starter? | 2 strokes 4 life | Enduro Engine - 2 stroke | 2 | 09-08-2008 09:47 PM |