Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-22-2018, 02:26 AM
Wilmer Wilmer is offline
Member
 
Join Date: Jan 2018
Posts: 22
Default Screw instead of a vent to the cylinder

Hello. I have a GasGas EC 125 05. And I saw that on the left side of the cylinder there is a little screw. But when I looked in the partlist of the bike I can see that there is going to be some sort of a vent with a hose on. In the partlist the name of the thing was DESVAP. I wonder what that vent do and if I am going to replace the little screw with a knew original vent with a hose on? Will there be any difference? Will the bike go better or is it just better for the engine if the vent is there. Here is a few pictures of my bike and someone else's bike with the vent.

My bike

Attachment 7392

Attachment 7393

A bike with the vent

Attachment 7394


Reply With Quote


  #2  
Old 02-22-2018, 03:59 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

It is probably just the power valve chamber drain, if you run the fitting and a hose you won't have to drain the spooge. It'll go the same.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #3  
Old 02-22-2018, 05:30 AM
Wilmer Wilmer is offline
Member
 
Join Date: Jan 2018
Posts: 22
Default

Okey, thank you for your reply. Then the best thing is to replace it with a vent and a hose instead, regardless it makes any differents or not.
Reply With Quote
Reply

Tags
cylinder, desvap, gasgas ec 125



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Name that vent hose! NM_GG_Rider Enduro Engine - 2 stroke 7 03-18-2019 09:03 PM
Screw instead of a vent to the cylinder Wilmer Enduro Engine - 2 stroke 1 02-22-2018 11:34 AM
air vent kit muellersq Enduro Intake/Carburetion - 2 stroke 0 09-16-2016 02:10 PM
gas tank vent hose flybars General Discussions & Announcements 14 05-17-2010 01:34 PM
PV vent hose......... Help joey11 Enduro Engine - 2 stroke 2 06-16-2008 12:21 PM




All times are GMT -5. The time now is 01:45 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org