Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-07-2024, 05:24 AM
gassumies gassumies is offline
Join Date: Jun 2023
Posts: 1
Default EC 300 cylinder max wear limit?

I bought the bike with no history when the piston was last changed.

I dissabled the top end,
turns out the previous owner had installed the A size piston (cylinder is stamped A but the bike is from 2009)

It has some light up and down marks but i cant feel them with my fingernail,
probably from the too small piston slapping around

The cylinder measured 72,03 and the biggest piston from vertex of wossner is for 72,02 bore

Is the coating too thin and break off?
or will the 0.01mm extra clearance cause it to slap around more and ruin the cylinder for good?

Last edited by gassumies; 02-07-2024 at 05:54 AM.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Piston/Cylinder Wear Question (with pics) gascadia Enduro Engine - 2 stroke 6 11-08-2021 11:19 AM
Vapour Engine Temp and RPM Limit values? Hicksi Enduro Electrical & Wiring 1 12-20-2012 02:38 PM
Pistons worn out limit motohellrider Enduro Engine - 2 stroke 9 11-20-2011 07:22 PM
Stupid Question? Rev Limit? Jakobi Enduro Intake/Carburetion - 2 stroke 5 11-13-2010 05:36 AM
300 EC RPM limit? Hollywood Enduro Engine - 2 stroke 9 09-10-2008 07:59 AM

All times are GMT -5. The time now is 05:44 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org