Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.

Thread Tools Display Modes
Old 11-08-2011, 07:41 PM
Hicksi Hicksi is offline
Join Date: Jul 2011
Posts: 69
Default Vapour Engine Temp and RPM Limit values?

I've installed a Trail Tech Vapor onto my '01 EC300. I need to program the maximum temperature value and maximum RPM value in order to set the warning lights.
What would be a high temperature?
And what would be a red light value for the RPMs?

Reply With Quote

Old 12-20-2012, 02:38 PM
skidmarx's Avatar
skidmarx skidmarx is offline
Join Date: Sep 2012
Location: Salisbury, UK
Posts: 28

I had the Vapour to go amber at 80 degrees C and red at 90. the bike usually ran around 65. How are you getting RPM on the Vapour as I couldnt get it on my old bike?

Hope this helps

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2K-3 test values? Tim H Enduro Electrical & Wiring 6 06-28-2012 02:18 PM
Engine control sensor values, 06 450 fse Carlslaw Enduro Electrical & Wiring 5 03-02-2011 02:19 PM
Stupid Question? Rev Limit? Jakobi Enduro Intake/Carburetion - 2 stroke 5 11-13-2010 05:36 AM
300 EC RPM limit? Hollywood Enduro Engine - 2 stroke 9 09-10-2008 07:59 AM
Temp sensor for 250 computer mattmax Enduro Engine - 2 stroke 2 03-20-2007 08:28 PM

All times are GMT -5. The time now is 06:27 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org