Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-17-2011, 04:48 PM
reiterrider's Avatar
reiterrider reiterrider is offline
Senior Member
 
Join Date: Feb 2009
Location: Woodinville, WA
Posts: 141
Default 2011 plastics Crossover?

Anyone know what if any crossover there is for 2011 plastics?
I need a front fender for an 2011 300
Gofasters advertises them for $127


__________________
Howie

2008 KTM 530

Former Fantasies:
2007 KTM 525
2004 Honda CR250R
2011 Gas-Gas EC 300
2009 KTM 300 XC-W
2004 KDX 200
2000 KDX 220
2003 Gas-Gas EC 250
2004 Honda CRF 250X
2005 Honda CRF 250X

What can I say, I'm schizophrenic and ambidextrous!
Reply With Quote


  #2  
Old 12-17-2011, 05:02 PM
Mick Mick is offline
Senior Member
 
Join Date: Nov 2011
Location: Caldwell, Idaho
Posts: 249
Default

Found this: http://www.motorcycle-superstore.com...nt-Fender.aspx


Polisport is showing a complete kit on their website for the 2011's.

I just bought an 11 myself and need to find plastics as well.

There is a dealer in California that carries Polisport...they might be able to get the kit. I'll have to give them a call.

EDIT: Just tried calling, they are closed today, I'll give them a ring on Monday.

http://www.southernms.com/

http://www.polisport.com/motorbikes/...a=&ID_ORG=8616


Ride PG has graphics too...

http://www.ridepg.com/product_pages/...s_products.php

Last edited by Mick; 12-17-2011 at 06:22 PM.
Reply With Quote
  #3  
Old 12-17-2011, 05:48 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 710
Default

Quote:
Originally Posted by reiterrider View Post
Anyone know what if any crossover there is for 2011 plastics?
I need a front fender for an 2011 300
Gofasters advertises them for $127

Call Gofasters it is most likely a typo
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #4  
Old 12-17-2011, 07:38 PM
MrBlah MrBlah is offline
Senior Member
 
Join Date: Aug 2011
Posts: 140
Default

if it is a typo, they have similar typo's on all the plastic for the 2011's, crazy high prices on them
Reply With Quote
  #5  
Old 12-17-2011, 09:57 PM
noobi's Avatar
noobi noobi is offline
Senior Member
 
Join Date: Sep 2008
Location: New Zealand
Posts: 1,031
Default

2010 crf 250 front guard goes on without too much drama. I think you have to oval either the front or back holes a bit. You should be able to find one of those cheap enough.
Reply With Quote
  #6  
Old 12-18-2011, 12:27 AM
kdxtreme kdxtreme is offline
Senior Member
 
Join Date: Feb 2011
Posts: 148
Default

the plastic they list has factory graphics on them
Reply With Quote
  #7  
Old 12-18-2011, 06:25 AM
MrBlah MrBlah is offline
Senior Member
 
Join Date: Aug 2011
Posts: 140
Default

Quote:
Originally Posted by kdxtreme View Post
the plastic they list has factory graphics on them
factory ec graphics? I have a sixdays
Reply With Quote
  #8  
Old 12-18-2011, 11:03 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,601
Default

Many of the parts prices are listed ridiculous expensive, and should be corrected. A new prospective GG customer could be scared orange by checking spares cost. I need a top end kit, now I know from owning GGs for years that they can be had for less than $150 easy, and still can. Why are they listed for over $300 on the GF site? Seriously, its not doing anyone any good.
Reply With Quote
  #9  
Old 12-18-2011, 11:42 AM
ScottyR ScottyR is offline
Junior Member
 
Join Date: Jul 2006
Location: Stratford, Ontario
Posts: 605
Default

The plastic for a Gasser is as cheap as any other bike today.

The graphics on the other hand are grossly priced. Just buy the bare plastic and put a graphics kit on them. PG makes some pretty nice kits for the Gassers and HBD graphics in Florida is getting onboard with GG templates now.
Reply With Quote
  #10  
Old 12-18-2011, 12:19 PM
Mark Berg - CPD's Avatar
Mark Berg - CPD Mark Berg - CPD is offline
Site Sponsor
 
Join Date: Aug 2006
Location: All over Minnesota
Posts: 390
Default Pricing issues

The plastics with stickers (which is what GasGas Spain sells) is expensive but we have lowered the pricing, but our website uploader hasn't completed the changes yet. I expect it may be a week or two more before the changes are shown, as with a variety of other prices on parts. Sorry for the long delay, it isn't as easy as a complete one click up load.

Plastics without graphics (we import from Polisport) are considerably less expensive, please contact your local dealer for pricing and fitment.

Also, our microfiche program should be fixed within a month as well, to include 2007-08 bikes with all plastic fitments both graphic and non graphic as well as having the 2012 product online.

These are the main reasons I am sitting here in Girona Spain waiting to be at the factory the next 2 days. To get better information and better pricing for everyone from ourselves, to the dealer, to the customer.
__________________
Mark Berg
Reply With Quote
Reply

Tags
fender, front fender, plastic



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crossover-KTM Rads ? husley General Discussions & Announcements 2 04-10-2011 07:28 PM
Gas cap crossover help hotshot Enduro Chassis & Body 1 03-01-2011 08:35 PM
2011 Plastics blanc General Discussions & Announcements 17 01-25-2011 08:42 PM
2011 Plastics on 2010 blanc General Discussions & Announcements 2 11-26-2010 06:51 AM
2001 Crossover Plastics leejames Enduro Chassis & Body 4 11-28-2009 07:01 AM




All times are GMT -5. The time now is 06:18 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org