Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 04-05-2014, 04:24 PM
savage sausage's Avatar
savage sausage savage sausage is offline
Senior Member
Join Date: Jul 2011
Posts: 376
Default clutch plates

I have a 98 ec250 and the clutch plates are fried!!
does anyone know if their are any part crossovers?
or whether plates from a newer gasser will fit,as I see plenty of kits for 00 onwards


Last edited by gasgasman; 04-06-2014 at 01:50 PM.
Reply With Quote

Old 04-24-2014, 02:24 AM
Jim Cook's Avatar
Jim Cook Jim Cook is offline
Platinum Level Site Supporter
Join Date: Sep 2006
Location: Smackover, Arkansas (AR)
Posts: 687
Thumbs up

Yes, they will fit. Other than the 125, all engine sizes share the same clutch drive plates and friction disks.

I like OEM and the Moose kits made for them by Dunlopad (I believe) the best.
I think they also supplied the OEM GG parts after 2005 or so. At least they started looking the same about that time.

The friction disks look identical to a CR250R, but the CR friction disk is 3mm thick, where the GasGas disks are 2.7mm thick.

I did find a crossover with an old Honda CX500 street bike, but didn't like either the Vesrah nor Barnett material's performance.

The metal drive plates are unique to GasGas.
Jim Cook
Smackover Racing
'11 Gas Gas EC250 (primary ride)
'06 Gas Gas DE300
2004 Gas Gas TXT300 Pro
'94 Husaberg FE350
'86 Yamaha IT200
'86 Honda TRL200 Reflex
'04 KTM 525EXC (soon to be dual sported)
Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes

Let's go riding!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch plates worn speeddemon Enduro Engine 4 stroke (including EFI & Exhaust) 6 01-28-2012 09:30 AM
clutch plates blanc Enduro Engine - 2 stroke 3 03-18-2011 05:08 AM
steel clutch plates steve Enduro Engine - 2 stroke 3 03-15-2011 09:22 PM
clutch plates mxdj2003 Enduro Engine - 2 stroke 4 11-02-2009 01:37 PM
New DP clutch plates won't fit - suggestions? stay_upright Enduro Engine - 2 stroke 6 05-26-2008 09:59 AM

All times are GMT -5. The time now is 11:47 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org