Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2017, 10:38 AM
Nicke_pota Nicke_pota is offline
Member
 
Join Date: May 2017
Posts: 1
Default GasGas 125SM 04 Small end bearing

I've been looking everywhere for a top end bearing that will fit my piston rod and piston pin, the problem is that in the manual, it says that the bearing should be 18x22x22 but when I tried that one, it didn't fit the pin. It might have another piston kit, but I'm not sure. Does anybody know about popular piston kits for the 04 125? And if so, what type of top end bearing will fit. BTW The piston that was already in it when it broke was a w?ssner piston if that helps.


Reply With Quote


  #2  
Old 05-04-2017, 12:10 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

the 2005 engine parts manual shows the bearing dimensions you mentioned which I agree is not correct. I believe the 125 pins is 15mm not 18mm like the 200, 250 and 300.

http://www.ebay.com/itm/Cage-a-aigui...RYdIM1&vxp=mtr

http://www.wiseco.com/ProductDetail....04&AppID=26795

Some years 125 had a flat top piston and some had a dome. The GG125 pistons interchange some YZ125 and CR125 pistons but you need to match what is in the engine (provided the correct piston is already there).
Reply With Quote
Reply

Tags
125sm 04, needle bearing



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Small amount of oil in crankcase memphis2857 Enduro Engine - 2 stroke 8 09-30-2014 10:41 PM
GasGas small fit vs others true? Sizing changes over the years? RonC General Discussions & Announcements 34 04-19-2013 09:27 AM
GG ec300 - too small Richard General Discussions & Announcements 15 02-24-2011 07:57 PM
Small changes I would like to see. REVERUP General Discussions & Announcements 92 01-04-2011 04:23 PM
Small bike and ATV ban. Ud_luz General Discussions & Announcements 22 05-04-2009 01:06 PM




All times are GMT -5. The time now is 10:22 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org