Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-09-2017, 02:41 AM
dewenduro's Avatar
dewenduro dewenduro is offline
Gold Level Site Supporter
 
Join Date: Nov 2015
Posts: 30
Default Rekluse Core Manual (RMS7000)

Picture gallery:
https://goo.gl/photos/Qn6i33wQSk4oXvhw5

Questions:

Does any one know
-what's difference between 178-002B & 178-002A clutch boss?
-what's thickess the new rekluse fibre plate?
-what's thickess the new OEM fibre plate?
-what aim is the steel SEEGER ring in the clutch boss?

Theory:
Core manual steel drive plate thickness (0.06") 7 piece & 1 piece (0.04)
Sum: 7x0.06+0.04=0.46" (11.68mm)

Fibre plate
I think Gasgas new OEM 2.8 mm.
Sum: 2.8x8=22.4 mm

Plates height: 22.4+11.68=34.08 mm

This is not so good, because pressure plate and clutch boss full closed distance is 34.08 mm

I think the 178-002B need thicker fibre plate than 2.8mm.
(sample Cr250 fibre plate 3mm)
or thicker start steel plate, or more steel plate.

Has anyone run into the same problem?

In picture gallery, my fibre plate thickness is 2.65mm
I can slove this problem, I'm only curious.

Thanks!


Reply With Quote


  #2  
Old 08-09-2017, 04:25 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

There are 8 friction plates in your stack and 7 steels so your calc is wrong.

How does the stack actually measure up? I've never played with a rekluse to give any decent advice in afraid, does it have a set of instructions you can post?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #3  
Old 08-10-2017, 03:24 AM
dewenduro's Avatar
dewenduro dewenduro is offline
Gold Level Site Supporter
 
Join Date: Nov 2015
Posts: 30
Default

Quote:
Originally Posted by motopsycho87 View Post
There are 8 friction plates in your stack and 7 steels so your calc is wrong.

How does the stack actually measure up? I've never played with a rekluse to give any decent advice in afraid, does it have a set of instructions you can post?
My calc contains 8 steels. 7 piece 0.06" and 1 piece 0.04"
Rekluse stack start with 0.04" steel plate.

I read on forum, the new gas OEM friction plate thickness is 2.85-2.9.
This is my calc error...

The newer RMS H450 rekluse steel plate thickness is 0.065" not 0.060"
https://www.extracross.com/Motocross...Precision.html

Instructions :
https://goo.gl/photos/AhqNyo3E593sHN8K6
https://goo.gl/photos/4WERAMXQ3DG4hQYA7
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rekluse Core Manual gasgasman Enduro Product Reviews 4 11-06-2016 03:54 AM
Rekluse Core EXP 3.0 d251man Parts 5 10-03-2016 06:05 PM
Rekluse Core EXP 3.0 Weekend Warrior General Discussions & Announcements 5 09-10-2014 10:47 PM
rekluse core manual question?? nambo-trev Enduro Engine - 2 stroke 3 02-15-2014 06:12 PM
Rekluse core EXP 2.0 desertgasser300 Parts 5 07-01-2013 11:29 PM




All times are GMT -5. The time now is 05:58 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org