Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 09-18-2023, 08:39 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

Did you wash the cylinder with hot soapy water after you got it back from the platers? Sometimes they are a bit lazy and don?t wash them properly. And brake cleaner on a rag is not good enough. The hone lines it the cylinder hold a lot of microscopic honing grit etc.
Check for cleanliness with a wipe with a white rag and fresh engine oil. Should not be grey at all.


__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote


  #12  
Old 09-19-2023, 01:16 PM
Dario Dario is offline
Member
 
Join Date: Aug 2023
Posts: 17
Default

I just washed it with a rag and some brake cleaner. Put a little bit of an oil coating everywhere and put it on.
Reply With Quote
  #13  
Old 09-19-2023, 01:29 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 590
Default

Quote:
Originally Posted by Gasser Nate View Post
Did you wash the cylinder with hot soapy water after you got it back from the platers? Sometimes they are a bit lazy and don?t wash them properly. And brake cleaner on a rag is not good enough. The hone lines it the cylinder hold a lot of microscopic honing grit etc.
Check for cleanliness with a wipe with a white rag and fresh engine oil. Should not be grey at all.
+1. The debris can get into the transfer ports also, so clean everything well with soapy water until no residue is visible.
Reply With Quote
Reply

Tags
cylinder, piston



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ec 300 cylinder problem... knutte112 Enduro Engine - 2 stroke 7 02-17-2014 11:13 AM
problem 2002 ec300 wont rev out? andy176 Enduro Engine - 2 stroke 17 10-07-2013 07:54 PM
2006 EC300 problem fury1 Enduro Engine - 2 stroke 29 06-09-2009 05:40 PM
ec300 clutch problem dirtjunky_uk Enduro Engine - 2 stroke 13 02-27-2009 08:08 AM
Gear box problem 07 ec300 peterr Enduro Engine - 2 stroke 5 02-26-2007 01:07 AM




All times are GMT -5. The time now is 01:43 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org