Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-01-2011, 11:32 AM
Todd5774's Avatar
Todd5774 Todd5774 is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Hampshire, UK
Posts: 478
Default Diameter of front wheel bearing?

Does anybody know the outer diameter and also the width of the bearings of the front wheel bearings in an 02 ec300?

Am fitting some different forks and the axel is a different size and rather than have a custom axel machined up, going to try a bearing supplier first and see if i can get some bearings to match both the 02 wheel and the new axel.
Its either that or buy a wheel that will fit the axel from the doner bike of the forks.

I can dismantle the wheel if nessecary but want to keep riding the bike while i sort out the new front end.


__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic.
Now a 250cc.
Reply With Quote


  #2  
Old 02-01-2011, 12:59 PM
roostafish's Avatar
roostafish roostafish is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Eugene Oregon
Posts: 1,245
Default

I think you can get the dimensions off of the part number for the bearing. If you pull the wheel off, then the seal, you may be able to read it.
__________________
Mike Sheetz
OMRA #21AA
What will I be riding next? Christini GG 300?
'15 KTM 300 XC-W
'08 EC 250 (Gone to new happy owner)
Gran Prix Cycle
LTR Suspension
RB-Designs
Reply With Quote
  #3  
Old 02-02-2011, 10:01 AM
mattholew mattholew is offline
Member
 
Join Date: Dec 2010
Posts: 83
Default

I believe they are the same as my 2001 EC 200 correct?

If so, I can measure for you this evening. I have mine busted apart right now for a wheel rebuild and have yet to install the bearings.
Reply With Quote
  #4  
Old 02-02-2011, 10:13 AM
Todd5774's Avatar
Todd5774 Todd5774 is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Hampshire, UK
Posts: 478
Default

Quote:
Originally Posted by mattholew View Post
I believe they are the same as my 2001 EC 200 correct?

If so, I can measure for you this evening. I have mine busted apart right now for a wheel rebuild and have yet to install the bearings.
Its ok took the wheel apart, and measured them anyway, but thanks for the offer!
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic.
Now a 250cc.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wheel bearing replacement bchatt Enduro Chassis & Body 2 01-13-2011 08:37 PM
Front wheel bearing life roostafish Enduro Chassis & Body 11 12-27-2010 11:55 AM
Front Wheel Bearing Removal coolum74 General Discussions & Announcements 13 02-24-2009 03:29 PM
05 250 front wheel bearing seal #??? Bandit9 Enduro Chassis & Body 3 10-29-2007 06:49 PM
Rear wheel bearing ? ktmguy23 Enduro Chassis & Body 1 03-22-2007 06:45 AM




All times are GMT -5. The time now is 11:30 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org