|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
To much mid speed damping SHIVER 45
Today I can test my new stack in race conditions.
(but the rebound is still to soft) over trunks it feels good - the high speed damping is OK In sandcorners the front don't buckle - low speed is OK But over short and many little brake and acceleration bumbs it feels toooooo hard and stiff I think the mid speed damping is to stiff How can I solve this problem? here are the specs Rebound spring 15x0,2 15x0,3 15x0,3 22x0,3 11x0,2 piston 21 x 0,1 21 x 0,1 19 x 0,1 19 x 0,1 18 x 0,1 17 x 0,1 15 x 0,1 Base 22x0,3 Piston 22 x 0,1 22 x 0,1 22 x 0,1 11 x 0,2 may be a thicker crossover? 19 x 0,1 1.affect these 2 shims the midvalve or is this a more complex problem 17 x 0,1 2. 11 x 0,1 may be a thicker crossover? 15 x 0,15 14 x 0,15 13 x 0,20 12 x 0,20 11 x 0,20 135mm air 3mm preload 4,5N/mm spring SAE 5W/10W MIX 1:1 Motul Expert
__________________
Husqvarna TE 300 Last edited by Klausen; 04-18-2010 at 11:53 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shiver 45 internal measurements | AdrenalineJunky | Enduro Suspension | 27 | 10-19-2010 10:27 PM |
no variation in rebound (Shiver 45) | Klausen | Enduro Suspension | 56 | 08-16-2010 10:38 AM |
Shiver manual | Ud_luz | Enduro Suspension | 1 | 09-20-2008 03:28 PM |