Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-11-2013, 10:41 AM
brider brider is offline
Member
 
Join Date: Nov 2011
Posts: 88
Default Which year/model Jap bike uses same '06 EC300

....front brake?

I FINALLY found Moose Racing supplies NISSIN Master Cyl kits, but shows no listing for GG. But it DOES show _hitloads of listings for same-vintage Jap bikes as my '06 EC300. Anybody know which Jap bikes use the same Nissin brakes?


Reply With Quote


  #2  
Old 03-11-2013, 02:13 PM
Anders's Avatar
Anders Anders is online now
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

My sons' bikes both use the sme brake pads, so I recon the caliper is also the same. They are a 2000 or thereabouts DRZ400S and a 2007 RM125.

Sent from my OMNIA7 using Board Express
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc

Last edited by Anders; 03-11-2013 at 05:39 PM.
Reply With Quote
  #3  
Old 03-11-2013, 05:33 PM
Mattnzl Mattnzl is offline
Member
 
Join Date: Jan 2012
Location: NZ
Posts: 78
Default

KDX200 from 95 onwards have the same pads too, BUT the master cylinder on my 2007 GG is definitely a slightly different shape. I haven't pulled either apart to know what's different internally though sorry.
Reply With Quote
  #4  
Old 03-11-2013, 05:48 PM
Anders's Avatar
Anders Anders is online now
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Oops! Didn't really notice that it was the master cylinder you asked about.
In that case I am not really sure, but would presume the aforementioned Suzukis also use the same parts there.

Sent from my OMNIA7 using Board Express
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #5  
Old 03-11-2013, 06:05 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

2002 CR250 brake lever fits my master (2002 XC300), but a 2002 YZ426 lever does not. I would look at which lever crosses over and go with that kit. Where have you found the kit? What is their return policy? If it's less than $25, what's the worst that can happen?
__________________
Phil
(New bike pending...)
Reply With Quote
  #6  
Old 03-11-2013, 09:10 PM
brider brider is offline
Member
 
Join Date: Nov 2011
Posts: 88
Default

Moose Racing sells rebuild kits, and the PICTURE of the 0617-0018 kit that fits CR250R 2000-2007 (plus a bunch of other Hondas from that same era) LOOKS exactly like my parts. Figures that NOWHERE can I find the DIAMETER specs of the MC, but like you said, what's $25....

I'll let everyone know if it fits.
Reply With Quote
  #7  
Old 03-19-2013, 05:09 AM
gassergrant gassergrant is offline
Senior Member
 
Join Date: Jun 2011
Location: Herts England
Posts: 428
Default

Quote:
Originally Posted by brider View Post
....front brake?

I FINALLY found Moose Racing supplies NISSIN Master Cyl kits, but shows no listing for GG. But it DOES show _hitloads of listings for same-vintage Jap bikes as my '06 EC300. Anybody know which Jap bikes use the same Nissin brakes?
my old 94 cr500 has the same caliper as my gg, some kx's have the same
__________________
03 ec300
honda cr500 94
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I figure out exactly which model bike I bought?? Wheelieman69 Enduro Engine - 2 stroke 23 05-27-2013 04:09 PM
What model year is it? mcnut Enduro Chassis & Body 6 05-06-2011 12:45 PM
EC300 which year to buy? (F5) General Discussions & Announcements 13 09-12-2010 05:48 PM
EC300 year differences hotshot General Discussions & Announcements 10 12-15-2009 07:54 AM
EC250 Model Year Changes smooth General Discussions & Announcements 12 08-23-2007 09:16 AM




All times are GMT -5. The time now is 07:35 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org