Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-17-2008, 04:57 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default TrailTech speedo -- brake caliper whole outside the arc

I finally got 'round to installing my Trail Tech Endurance with the cool home-fabricated mount above the tank bolt.

As I screwed the pick-up into the Nissin brake caliper unit, I couldn't help but notice that the pick-up hole would place the cable a good 1.25-inches outside the arc of the magna-bolt on the brake rotor.

Result, an otherwise functioning Trail Tech Endurance doesn't record speed.



Any quick fixes? The former owner said he fabbed a bracket. I gotta be missin' sumthin here.
Reply With Quote
  #2  
Old 07-17-2008, 08:14 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

I screwed mine right in and it picks up the magnet just fine on my 2004 250. On mine this was the same location as the stock speedometer.

You can see it along with the magnet in this image: http://www.gasgasrider.org/gallery/d...0/100_1512.JPG

If you need to stick a magnet that came with the Trailtech to the rotor with some JB Weld.
__________________
2004 GasGas DE250
Reply With Quote
  #3  
Old 07-17-2008, 09:09 PM
mike989 mike989 is offline
Senior Member
 
Join Date: Jul 2006
Location: Southern Nevada
Posts: 126
Default

[QUOTE=AZRickD

Any quick fixes? The former owner said he fabbed a bracket. I gotta be missin' sumthin here.[/QUOTE]

Maybe.
I installed one on my 04 GG300, and found the same problem. I used the stock pickup cable, and just snipped the wires on the stock cable up by the handle bars, I snipped the wires off the trail tech pickup sensor (6" down from the connector) and soldered(sp) it to the stock pickup cable. I used plenty of shrink tube for protection.
I did the same thing on my 04 GG quad.
__________________
04EC300
04Wild450
07FSR450
Reply With Quote
  #4  
Old 07-17-2008, 10:16 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

Care to post pics (or e-mail them to me)?

I don't know where the stock pickup goes.

Thanks,

Rick
Reply With Quote
  #5  
Old 07-18-2008, 07:14 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

See here

__________________
2004 GasGas DE250
Reply With Quote
  #6  
Old 07-18-2008, 07:15 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Quote:
Originally Posted by AZRickD View Post
Care to post pics (or e-mail them to me)?

I don't know where the stock pickup goes.

Thanks,

Rick
Do you mean the cable? Yours is where the stock cable goes.
__________________
2004 GasGas DE250
Reply With Quote
  #7  
Old 07-18-2008, 11:23 AM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

This is all very strange. The stock pickup goes in the li'l hole in the Nissin caliper, but that location places it nowhere close to where any magnet can be easily placed (say the famous KTM notch).

I could drill a 3/8" hole but that would give me not much room for error in that thin metal area.
Reply With Quote
  #8  
Old 07-18-2008, 11:50 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Look at this picture:
http://www.gasgasrider.org/forum/att...3&d=1198860123

You can clearly see how my stock magnet is mounted to the wheel hub (circled). If you don't have the stock magnet, then fabricate a small bracket and screw it into the existing hole in the hub. It takes a small allen cap screw, maybe 2mm. Attach your magnet to the bracket.
__________________
2004 GasGas DE250
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trailtech rec/reg wence Enduro Electrical & Wiring 15 02-04-2010 07:50 AM
Rear Brake Caliper blitz11 Enduro Chassis & Body 11 10-28-2008 03:38 PM




All times are GMT -5. The time now is 09:56 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org