Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.

Thread Tools Display Modes
Old 02-17-2024, 05:48 PM
Demondiver Demondiver is offline
Join Date: Feb 2024
Posts: 2
Default 2015 GASGAS ec300 starter question

I have a 2015 ec300 - The starter crapped out. Is the rotation clockwise or counter clockwise for starter ? Where would be a good place to order one ? Also is their a replacement for the the rear brake master cylinder ? I overhauled but still can not get to work.

Thank you,

Reply With Quote

Old 02-18-2024, 12:58 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,071

Take the cover off. Mates one had worn an oval where the bevel gear ran.

Bored a hole and fitted a sleeve from bearing shop.

He then drilled a small hole and fitted a breather tube. Glued up the drain hole and put a few cc of trans oil in cover so it was always lubed.

I think he used a generic ktm starter but reversed polarity. Should be info to do that somewhere.
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2015 starter Nicktamps Enduro Electrical & Wiring 0 03-29-2020 06:06 AM
2015 gasgas ec300 $4000 Gasgas2015 Used Bikes 0 11-24-2019 08:05 PM
2015 GasGas EC300 E-start wilmington_powersports Used Bikes 2 12-03-2015 10:51 AM
2015 starter preventative maintenance Simmo737 Enduro Engine - 2 stroke 5 02-10-2015 09:16 AM
Starter question 2011 EC300 iamovru Enduro Electrical & Wiring 3 02-17-2014 12:01 PM

All times are GMT -5. The time now is 01:52 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org