Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-15-2007, 04:45 PM
skid jackson skid jackson is offline
Senior Member
Join Date: Jul 2006
Location: NH, USA
Posts: 1,057
Default rear axle nut

The torque spec is 60 ftlbs. Which is where i put it. However I have yet to be able to loosen this bolt with just a ratchet. I always have to use a cheater bar. I bent my ktm multi fit tool trying to loosen it with that. A test to see how it might work trail side. I've got a motion pro axle nut wrench/tire iron tool now but I'm going to have to grind it down to fit. I'm figuring I'll have to stand on it to loosen the bolt. Do you guys run the axle nut at 60 ftlbs?? What do you use to loosen it trail side. My drz was 40 ft lbs and used a castle nut so trail side repair wasn't an issue.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
rear axle nut wrench for a tool bag? jostby General Discussions & Announcements 11 06-03-2010 09:58 AM
450 wild rear axle bearings dogsbody Other GasGas Bikes/Quads 1 07-16-2009 10:03 AM
Extended Rear Axle -450 Wild HP Beardy Other GasGas Bikes/Quads 3 07-01-2009 07:43 PM
Anyplace make rear axle blocks? Motarded1 Enduro Chassis & Body 7 05-20-2008 07:53 PM

All times are GMT -5. The time now is 08:20 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org