Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-07-2019, 08:40 AM
fst96se fst96se is offline
Senior Member
 
Join Date: Apr 2014
Posts: 194
Default Need a new keyed ignition switch. Help!

Hey all, I had a bit of an off and broke my keyed ignition switch.

The bike will still kick start, but e start and my trail computer don't work.

Anybody know what part I need to get to replace that switch?

Also, I'm wondering about maybe eliminating it altogether. In which case I would need some sort of handlebar switch to turn electricity on and off. Anybody else done that?


Reply With Quote


  #2  
Old 11-07-2019, 10:28 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by fst96se View Post
Hey all, I had a bit of an off and broke my keyed ignition switch.

Anybody know what part I need to get to replace that switch?
I guess the part number is in the parts list at www.gasgas.es for your year and model?
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 11-07-2019, 12:25 PM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,418
Default

On the 2011 models the key switch has two functions.

Key on = make contact on the red wires to enable operation of the start button
Key on = break connection of the ground cicuit that shorts out the primary voltage for the ignition (no spark)

Key off = break circuit on red wires
Key off = make circuit for the ground

Bike can be kickstarted by disconnecting the wiring harness to the key switch (ignition grounding is defeated).

Later bikes may be different, download the relevant manual from the GG site and follow the wiring diagram.
__________________
2011 EC250E
Reply With Quote
  #4  
Old 11-18-2019, 09:07 PM
fst96se fst96se is offline
Senior Member
 
Join Date: Apr 2014
Posts: 194
Default

I ordered a switch from maddow cycles but it's backordered.

Anybody know if there is another brand substitute?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ignition map switch wiring dANbOT Enduro Electrical & Wiring 5 04-11-2019 02:23 PM
WTB ignition switch nmrider "Wanted to Buy" & "Want To Trade" 1 02-09-2015 10:09 PM
Ignition Curve Switch mcnut Parts 2 12-10-2014 06:35 AM
dual ignition switch ktmguy23 Enduro Electrical & Wiring 1 09-11-2007 05:21 PM




All times are GMT -5. The time now is 06:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org