GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-11-2012, 07:15 PM
Ed Ventura's Avatar
Ed Ventura Ed Ventura is offline
Gold Level Site Supporter
 
Join Date: Apr 2007
Posts: 131
Default 300 hard starting warm Having some carb issues.

I have a 2011 300 . All electrical is working fine.

I picked this bike up, left it in the basement for 2 months and then went to an enduro. I had a long day.

Bike was pig rich. And Very hard to start warm. Like let it sit 10 minutes then start it.

35 f 20 % humidity
Got home found
36mm ASII
6.5 Slide
NOZH 3rd
40 Pilot
178 main
Air screw No effect.
FLoat 6.5

I lowered the float to 8mm. It seem to help starting but ran still to rich. No Power. A little bit of change with Air Screw

I just installed a # 7 slide that is From My RB modded A.S.I It
Runs Much better. Very Crisp. Will need g2 Throttle cam for tight single track.
BUT"""
Air Screw has no effect. Even with idle screw out. Idles great. If shut it off sometimes it starts good , sometime it takes 20 kicks
Todays Weather 55 F 20 % humidity
Ed
__________________
2011 Sixdays 300

Last edited by Ed Ventura; 03-11-2012 at 08:27 PM.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Extremely hard starting problems Crankin04 Enduro Engine 4 stroke (including EFI & Exhaust) 27 01-11-2021 02:12 AM
Carb issues - Float bowl? Hicksi Enduro Intake/Carburetion - 2 stroke 7 10-19-2011 11:21 AM
04 EC 300 Hard Starting lordfeyr Enduro Engine - 2 stroke 4 01-25-2010 01:18 PM
2004 450 FSE Hot Starting Issues- MTNBK Enduro Engine 4 stroke (including EFI & Exhaust) 2 06-30-2009 07:19 AM
Hard starting - Timing change? mattmax Enduro Engine - 2 stroke 14 03-03-2007 01:03 PM




All times are GMT -5. The time now is 11:44 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org