|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
gas gas rims
I would like to change the rims on my bike to red to match my front fork color. anyone done this, and what brand did you go with? id like to use the factory hubs since they are already red. I checked a few wheel manufacturers websites and did not see any applications for a gas gas. Thanks!
|
#2
|
||||
|
||||
The GG wheels have a rather unique drill pattern (angle) to match the AJP hubs. In the USA I have found only one source(Buchanan Sun rims) and they are custom drilled blanks. Good USA wheels but not cheap. If bling means that much then it probably best to break them down and have them re-anodized red. Colored rims look good new but get beat to crap from rocks and tire changes. Bring back the natural aluminum shoulderless DIDs.
|
#3
|
||||
|
||||
Mark at GoFasters has Gold, Red and Silver factory rims. He hasn't put them on the website yet but the red ones look SWEET! Give him a call at 320-839-7143
The best part about going with factory rims, they will lace right up to your hubs so no need to buy new hubs with spacers to fit.
__________________
2013 GasGas 300 2004 GasGas 200 2011 GasGas 300 Ortonville Minnesota Last edited by djroggen; 07-26-2012 at 09:53 AM. |
#4
|
||||
|
||||
I believe Warp 9 Racing now carries GasGas wheels too.
|
#5
|
||||
|
||||
www.procycle.us does custom wheel builds from various off the shelf products. You may check them out. Carl is the guy to talk to. (541) 688-9385
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#6
|
||||
|
||||
Lots of options but he said he wanted to use his stock AJP red hubs, so that means rims drilled with the AJP spoke angles. Good to know about the factory rims at GF, are they pricy??
|
#7
|
||||
|
||||
Warp 9 wheel parts are usually interchangable with OEM. I haven't seen their GasGas wheel yet but all their other wheels have this feature. We used them for several seasons on our Hondas without any probelms.
|
#8
|
||||
|
||||
Here is another way to go! http://www.wheellacing.com/
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#9
|
||||
|
||||
S M Pro rims come drilled for gas gas , dont know if you can get them over there but cant see why not , you seem to every thing over there
|
#10
|
|||
|
|||
R A D racing has complete wheel sets for Gas Gas. The wheel set has oversize bearings and seals. You can get any color hub or rim.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
aftermarket rims | Moto-x | Enduro Chassis & Body | 4 | 01-27-2012 04:10 PM |
Rims & spokes, UK | Radbuster | Enduro Chassis & Body | 5 | 08-13-2009 12:58 PM |
120/100-18 on 2.15 rims? | gasIdaho | Enduro Chassis & Body | 5 | 04-24-2007 08:21 PM |
94' rims | Elvis74 | General Discussions & Announcements | 1 | 03-25-2007 09:50 AM |
D.I.D vs. Excel rims. | ktmbigfan | Enduro Chassis & Body | 4 | 02-22-2007 09:20 PM |