|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What is wrong with my dashboard?
It goes from start, every time i kickstart
My friend have same gg with same problem https://youtu.be/INyv1niDt_E Last edited by Rampart; 05-02-2017 at 02:57 PM. |
#2
|
||||
|
||||
Replace the CR2032 battery in the back of it. It's clearly got no power when the engine is off. I've seen the same thing with 3 x trail techs on my bikes.
In other news, my speedo sensor has stopped working. Anyone know how to test? |
#3
|
|||
|
|||
Never had to check one, but I bet TrailTech can provide some info.
tech_support@trailtech.net
__________________
2011 EC250E |
#4
|
||||
|
||||
Thanks Neil. Will email them. They've been helpful in the past with other questions.
|
#5
|
||||
|
||||
Easy check with ohm meter, magnet completes the circuit as it passes sensor.
Most times a broken wire at brake hose loop area from constant bending.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#6
|
||||
|
||||
Quote:
I think I have a spare one floating around as well. |
#7
|
|||
|
|||
This is the response I got from Trail Tech support.
"I would recommend placing a small piece of foam in between the back of the battery and the battery cover. This will make sure the battery does not lose contact with the meter. What is happening is when you are riding it hard the battery is vibrating and then loses contact with the meter causing the reset. Using the foam will stop this." Will let you know if this works when I get a chance. Later. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What's wrong with my schematic? | GGRider01 | Enduro Electrical & Wiring | 5 | 07-16-2016 07:17 PM |
Trail Tech Stealth Striker and Dashboard | wa_ndro | Parts | 4 | 08-19-2013 08:55 PM |
WTF is wrong with my shock? | n_green | Enduro Suspension | 9 | 02-09-2013 09:48 AM |
Time is wrong | Brian | Suggestion Box | 3 | 12-10-2009 03:33 PM |
is it wrong to- | mountain thumper | General Discussions & Announcements | 5 | 06-07-2008 10:10 PM |