|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Meca brake lever/ Fasstco Spring
I ordered the Meca rear brake lever for my 06 EC250. The lever went on smoothly bit I, for the life of me can't figure put where or how the Fasstco caliper return spring installs. The spring fits in the inside of the piston but the tophat nut doesn't fit inside.
Has anybody installed this setup? I know it's probably something very simple and I know I'm gonna feel like a dork when I get the answer but.....HELP !! Thanks in advance
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#2
|
||||
|
||||
Whew ! Glad I figured it out, turns out it was simple just as I feared. If you try to install the spring in the right place it is much easier :-) FWIW the Fasstco return spring kit installs above the clevis to the MASTER CYLINDER not the caliper piston. A nice idea and a nice kit although for those of us suffering from the occassional "senior moment" a picture would've been nice. The Fasstco web site described the part as a master cylinder return spring and that's what got me in the right place. Just in case someone needs this info in the future it is now here!
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#3
|
||||
|
||||
Post a picture if you can for all to see.
__________________
07 EC 300 (under 500 miles, selling soon) 97 KTM 250 EXC (sold) 2016 Trek Remedy 29er |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear brake lever GG 250 2009 | Klausen | Enduro Chassis & Body | 4 | 09-27-2010 04:46 AM |
Rekluse Clutch Brake Lever | kim | Enduro Engine - 2 stroke | 2 | 02-15-2008 07:41 PM |
Clutch and brake lever cross over? | colinmc400 | Enduro Chassis & Body | 8 | 07-30-2007 12:55 PM |
Front Brake Lever | cladoo | Enduro Chassis & Body | 4 | 02-07-2007 08:45 AM |