#1
|
||||
|
||||
LTR Magic!
I had my 2010 Six Days Sachs suspension revalved this summer by Les at LT Racing and he did an amazing job. I have enough rides on it now to say this without doubt, it is soooo much better. I used to try and avoid rocks and roots because of the mid stroke harshness, but now I find myself aiming for this stuff just to try and test the limits of the suspension. In all honesty, I didn't think the stock suspension was that bad, I new there was room for improvement, but I didn't realize how much until I had it done. I really notice it now when I ride my buddies 2011 six days with zoke/ohlins back to back with my bike, there is no comparison. I would highly recommend using Les for your suspension needs, not only is his work top notch, but he is great to deal with and super helpful. Give him a call!
Wes.
__________________
13 EC200 Race 10 EC250 Six Days (SOLD) 07 EC250 (for sale) 85 RZ500 75 XL250 71 CB100 08 DRZ70 (son's) |
#2
|
|||
|
|||
Sounds great!! I am going through considering a revalve right now on my '10 with the Sachs. I'm happy with the rear, the front HS compression is a bit harsh to me on chop, roots and small rocks.
I guess I have to ride faster to make it work right!
__________________
'10 EC300 -- very happy |
#3
|
|||
|
|||
I to have nothing but praise for LTracing! Les does awesome work and is great with customer service!
__________________
03 EC300 The pig...04 XR650L 01 380sx |
#4
|
|||
|
|||
What did he do to fix it? He'll tell you if you ask.
|
#5
|
|||
|
|||
just curious,has anyone with the 2011 45 mm zokes got Les to set them up? i hear a lot of people that are not real happy with them in stock form. just looking for some feedback if there is any out there yet?
|
#6
|
||||
|
||||
Same as the older 45s, he has done hundreds of them since '04, plus Huskys. He also just did his first set of the new CC 48mm Zokes.
|
#7
|
|||
|
|||
...and what did he do to his first set of 48mm Zokes? What was their behavior before he got to them?
|
#8
|
||||
|
||||
Basically just revalved them softer. He was also surprised the seals had a lot of stiction. They were from a Nambo. I didn't get all the details but the forks were stiff. They are much like a KYB CC fork so while there is a learning curve I suppose it won't be to steep.
|
#9
|
|||
|
|||
48 zokes
I have a set 48mm zokes I sent to les. The fork compression was really stiff and the rebound was way to fast. I am comparing them a set ttx valved and sprung by Ohlins usa. So far I like the Ohlins better but has nothing to do with the quality of work by ltr. This week I replaced the stock. 41 with. 44. I believe I was riding to deep into the stroke. I will let everyone know how this works out.
__________________
2011 Nambotin 2010 300 Six Days 2008 Raga 2008 250 xc KTM 2007 200 xc KTM To many KTM's to list 1983 175 IT Yamaha 1995 200 KDX Kawasaki |
#10
|
||||
|
||||
What springs fit? I'm going to need .44s as well and would like to just do it ASAP after the bike shows up so I can enjoy it.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
magic cloud happy dance | mtothef | General Discussions & Announcements | 7 | 07-19-2011 02:31 PM |
Clay Stuckey's magic carburator ? | Fred1956 | Enduro Intake/Carburetion - 2 stroke | 1 | 07-02-2011 04:33 PM |