Neater crossover thread?

[Dirk D]

Anyone know what bikes use the same rear rotor as my '01 EC 300?

Just a heads, because I tried looking on this forum for a definitive answer as to which rebuild kits will work on our bikes. I have a 2005 EC300 and the front brake was weak. I read that everybody thought the caliper and front brake master cylinder were from a Honda, and that would be correct. I used the following Moose Racing Parts# 0617-0018 for the master and #1702-0091 for the caliper, the Moose kits are actually true Nissin Rebuild kits btw.
According to Moose the front master cylinder is on these bike:
Honda CR125 2000 - 2007
Honda CR500R 2000 - 2001
Honda CR80R 2000 - 2002
Honda CR85R 2003 - 2007
Honda CRF150R 2007 - 2009
Honda CRF250R 2000 - 2007
Honda CRF250X 2004 - 2015
Honda CRF450R 2002 - 2006
Honda CRF450X 2005 - 2015
Honda XR250R 2000 - 2004
Honda XR400R 2000 - 2003
Honda XR650R 2000 - 2007

And the Caliper is on these:
Honda CR125 1987 - 2007
Honda CR250R 1987 - 2007
Honda CR500R 1987 - 2001
Honda CRF150F 2006 - 2012
Honda CRF230F 2003 - 2012
Honda CRF250R 2004 - 2016
Honda CRF250X 2010 - 2016
Honda CRF450R 2003 - 2016
Honda CRF450X 2003 - 2016
Honda XR250R 1993 - 2004
Honda XR650L 1993 - 2009
Honda YZ426F 1998 - 2002
Yamaha WR250F 2001 - 2015
Yamaha WR400F 1998 - 2002
Yamaha WR426F 1999 - 2002
Yamaha WR450F 2003 - 2015
Yamaha YZ125 1998 - 2007
Yamaha YZ250 1998 - 2007
Yamaha YZ250F 2001 - 2006
Yamaha YZ400F 1999 - 2002
Yamaha YZ426F 1998 - 2002
Yamaha YZ450F 2003 - 2007

After rebuild, this thing will throw you over the bars, I have standard banjo bolts. I used a mityvac to bleed, and pushed the pistons in at least three times to reverse fluid direction and help get in any air out. I hope this helps somebody out. Also not all Nissin master cylinders are the same. I had a 1999 Kawasaki KDX with a KX USD fork conversion, and the master cylinders were different, even though the bikes years were pretty much the same. And noticing that moose only lists Hondas for the master cylinder, but Hondas and Yamahas for the caliper, i would say Honda had Nissin do something different for their masters.