Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2013, 05:24 PM
gasn4christ gasn4christ is offline
Member
 
Join Date: Sep 2013
Location: Maine!!!!!
Posts: 14
Default clutch issue

so i had to replace my water pump seal as the coolant was getting into the tranny. pulled the clutch and inner cover.. made the swap of seals... put it back together and now...... my clutch does not disingauge.......... before i took it apart. it did drag a little. sometimes it would almost come to a stall at idle with the clutch pulled in gear. i bled it a couple times and it feels like it should just not disengauging..... anybody??? oh 2012 300ec


__________________
2012 gas gas ec 300 WHOA BARB!!!!!
2003 ktm 300exc....for sale
2003 kx 250 woods out..gone
2002 ktm 400exc.... bye bye
2005 yamaha wr 250f...too slow!
2001 ktm 300exc....lemon i think
2003 kx 250...wow but gone...
2008 dr 650..what was i thinking...
1987 yz 125..started it all..
Reply With Quote


  #2  
Old 10-10-2013, 12:23 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,336
Default

When you were working on it was the bike lying on its side? Possibly resting on the gear lever?
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #3  
Old 10-10-2013, 11:28 AM
gasn4christ gasn4christ is offline
Member
 
Join Date: Sep 2013
Location: Maine!!!!!
Posts: 14
Default

I think I might have had it in gear to make getting the inner basket but off...
__________________
2012 gas gas ec 300 WHOA BARB!!!!!
2003 ktm 300exc....for sale
2003 kx 250 woods out..gone
2002 ktm 400exc.... bye bye
2005 yamaha wr 250f...too slow!
2001 ktm 300exc....lemon i think
2003 kx 250...wow but gone...
2008 dr 650..what was i thinking...
1987 yz 125..started it all..
Reply With Quote
  #4  
Old 10-10-2013, 10:10 PM
thumperflipper thumperflipper is offline
Senior Member
 
Join Date: Aug 2012
Posts: 133
Default

Did you pull the clutch cover with the bike upright to see if the lever is actuating the pressure plate?
__________________
07 GG EC300
11 GG EC300E
Reply With Quote
  #5  
Old 10-13-2013, 03:02 PM
gasn4christ gasn4christ is offline
Member
 
Join Date: Sep 2013
Location: Maine!!!!!
Posts: 14
Default

soooo im calling this one my bad...... the washer between the inner basket and clutch hub had fallen off the shaft when i put it back together..... im dumb...
__________________
2012 gas gas ec 300 WHOA BARB!!!!!
2003 ktm 300exc....for sale
2003 kx 250 woods out..gone
2002 ktm 400exc.... bye bye
2005 yamaha wr 250f...too slow!
2001 ktm 300exc....lemon i think
2003 kx 250...wow but gone...
2008 dr 650..what was i thinking...
1987 yz 125..started it all..
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
advice on slow starting and clutch issue Orujo Enduro Engine - 2 stroke 0 04-23-2013 06:08 PM
2003 ec250 clutch issue dirt2road Enduro Engine - 2 stroke 12 08-17-2012 03:15 PM
Overflow issue and bog forgiven Enduro Intake/Carburetion - 2 stroke 4 10-05-2011 09:20 AM
Clutch Drag Is Not An Issue! Rick Pictures & Videos 7 11-25-2010 07:50 AM
clutch issue boostedte37 General Discussions & Announcements 2 11-09-2009 06:58 PM




All times are GMT -5. The time now is 02:15 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org