|
|
|||||||
| Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
|
Thread Tools | Display Modes |
|
#1
05-31-2015, 10:59 PM
|
|||
|
|||
2011 - EC250 - Exteme bogging WOT low rpm. Please help!
Steep hills my bike has no power once you have stopped or are lugging, sometimes when slipping the clutch revs go up and straight to a bog even at WOT.
It just bounces between slipping revs to bog with no power no missfiring, just 0 power at all. Quite frustrating. In the mean time I will up the rear sproket to mask the problem until I can get a fix. Bike is a 2011 ec250. I just fixed the power valve tension issue/hitting case, that helped with low end power a lot, how-ever it made the bike's warmup a lot slower. Bike will miss during middle of the rev range until really warm (at least 5-6 minutes). Please help. 
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| bogging past around 4500rpm. 06 EC300 | stian | Enduro Engine - 2 stroke | 16 | 06-15-2015 03:15 PM |
| Bogging and top end | Capz85 | Enduro Intake/Carburetion - 2 stroke | 14 | 04-05-2015 10:56 AM |
| GasGas 250 EC Bogging in tech and hill climbs | BorrisDieBlokman | Enduro Intake/Carburetion - 2 stroke | 6 | 11-30-2014 03:03 AM |
| carb probs .bogging/ hesitation | hippygary | Enduro Intake/Carburetion - 2 stroke | 4 | 09-12-2013 12:10 AM |
| 03 GasGas 450FSE Bogging down, TPS value? | ktownrider | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 12-12-2007 10:34 PM |
Threaded Mode