|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Lets clear up clutch crossover
Lots of conflicting info on here as to what will and won't work on the GG as far as clutch replacement. Mine is starting to slip and was looking at brands/crossover options. Why don't you post what you are running and how it work and any mods you had to do. This is very interesting, but adds to the confusion-
http://www.barnettclutches.com/searc...n=301-48-10001 From what I have read looks like the best bet is to get the 3mm plates (GG is 2.7mm) with a thinner thrust washer (1.5mm, supposedly one off a Kawasaki will work, would someone post the exact model?) to make up the difference as the 2.7mm aftermarket are prone to breaking. How is this working out for folks?
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Crossover Clutch Mastercylinder | leejames | Enduro Engine - 2 stroke | 2 | 07-21-2010 08:45 PM |
Clutch Basket Crossover | eff | Enduro Engine - 2 stroke | 13 | 03-07-2010 07:37 PM |
GG 125 clutch crossover | jayc | Enduro Engine - 2 stroke | 3 | 07-08-2009 11:51 AM |
125xc clutch crossover? | jayc | Enduro Engine - 2 stroke | 0 | 04-01-2009 12:23 PM |
250/300 clutch parts crossover | Skidad | Enduro Engine - 2 stroke | 5 | 01-09-2008 11:54 AM |