|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
30 degree temperature drop
I have my bike jetted perfectly for 70 degrees F (21C). Going to ride same elevation but 35 F (2C). I won?t really have time to try a bunch of settings so looking for a good ball park change... up one size main, lower clip one, etc.
what do you suggest? Just going on a casual ride not a race so just looking for an easy change without a bunch of tests that will keep me from running lean. |
#2
|
||||
|
||||
If it were me I would throw the next size up main and pilot and tweak the air screw to suit. That is very similar to my range of temps which I get away with the above changes.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#3
|
||||
|
||||
If it feels lean you can also raise the needle one clip.
|
#4
|
||||
|
||||
We ride studded tires all winter here with just a air screw adjustment. But we are just doing single track. If we were ice racing at wfo we would go with a big main.
__________________
2018 EC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Did GoFasters drop GasGas support? | GGRider01 | General Discussions & Announcements | 41 | 07-29-2016 11:52 AM |
Drop in forks for 04 ec250 | barbwire44 | Enduro Suspension | 3 | 11-29-2014 07:36 AM |
EGT (Exhaust Gas Temperature) | Rick | Enduro Engine - 2 stroke | 14 | 02-12-2013 12:28 AM |
coolant temperature | a c t i v e X | Enduro Engine - 2 stroke | 9 | 06-30-2012 01:00 AM |
Temperature Switch | swazi_matt | Enduro Electrical & Wiring | 4 | 03-28-2012 02:29 PM |