GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-24-2010, 11:24 AM
stevehipkiss stevehipkiss is offline
Member
 
Join Date: Sep 2008
Posts: 14
Default Dual Map switch..

Have a 2005 ec300 in uk...have fitted a switch to my bars connected to the wires from the cdi unit...which I am told adjusts the powercurve..

Q. Have has it on the bike now for about a 12month, but cant seem to see any difference..Tested switch and one position current flows, the other position no current....How does this switch/current flow work ?

How much difference should I be seeing/noticing ?

WHat do you lads think of your swithes ???


Reply With Quote


  #2  
Old 01-24-2010, 12:29 PM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

I have an 07 EC300 and it has a switch. The only time you notice it is when it is jetted correctly and you are low in the revs and accelerating. It is a fair bit snappier off the bottom and when you blip the throttle on the sun mode.
Cheers Mark
Reply With Quote
  #3  
Old 01-25-2010, 01:26 AM
geraldh's Avatar
geraldh geraldh is offline
Member
 
Join Date: Sep 2009
Location: Durban, SA
Posts: 23
Default

I have an 06 ec300 the snow/mud setting just seems to hold the bike out of the Power band for a little longer...
__________________
Gerald H
2006 EC 300 Recently UPGRADED from WR400F
Reply With Quote
  #4  
Old 01-28-2010, 01:29 PM
stevehipkiss stevehipkiss is offline
Member
 
Join Date: Sep 2008
Posts: 14
Default

Cheers Gents,
I think Ive at last seen the difference today, as mentioned in both the above replies...
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Seriously contemplating switch. REVERUP General Discussions & Announcements 11 11-14-2009 06:35 PM
Dual mapping switch on 05 de250 thelonius General Discussions & Announcements 3 06-01-2009 02:37 PM
Dual Map Switch on Ec2008 GG27 Enduro Electrical & Wiring 9 11-07-2008 07:43 AM
dual ignition switch ktmguy23 Enduro Electrical & Wiring 1 09-11-2007 05:21 PM




All times are GMT -5. The time now is 03:23 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org