Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Community Forums > United Kingdom


Reply
 
Thread Tools Display Modes
  #1  
Old 03-27-2008, 07:02 AM
pondmore's Avatar
pondmore pondmore is offline
Member
 
Join Date: Feb 2007
Location: kent
Posts: 13
Default software

hi , does anyone know a way to tune a 450 fse. the closest dealer to me is a good 4 hrs drive away. can you buy the software package . sometimes my bike starts and sometimes it wont for love or money. im on my fourth starter bearing.


__________________
EC 450 FSE
Reply With Quote


  #2  
Old 03-27-2008, 09:52 AM
Nick's Avatar
Nick Nick is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Nevada
Posts: 560
Default

What year is your FSE ?
__________________
Dont follow me, You wont make it.
Reply With Quote
  #3  
Old 03-28-2008, 06:35 AM
pondmore's Avatar
pondmore pondmore is offline
Member
 
Join Date: Feb 2007
Location: kent
Posts: 13
Default

its a 2003
__________________
EC 450 FSE
Reply With Quote
  #4  
Old 03-28-2008, 06:53 AM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default

Install '04 starter gears and manual cam chain tensioner. Use full throttle when cold starting.
Reply With Quote
  #5  
Old 03-28-2008, 10:59 AM
pondmore's Avatar
pondmore pondmore is offline
Member
 
Join Date: Feb 2007
Location: kent
Posts: 13
Default

already got o4` starter gears. what is a manual tensioner ?
__________________
EC 450 FSE
Reply With Quote
  #6  
Old 03-28-2008, 04:46 PM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default

http://shop.thumpertalk.com/Manual_C...g_tt_mcct1.htm

Makes it easier for the starter to crank the engine due to less tensioned cam chain.

The software for reading the ECU and adjusting fuel trim is available from http://www.technoresearch.com. ECU model on FSE is IAW15P

Last edited by bergerhag; 03-29-2008 at 08:19 AM. Reason: malplaced word removed: 'can'
Reply With Quote
  #7  
Old 03-29-2008, 07:55 AM
pondmore's Avatar
pondmore pondmore is offline
Member
 
Join Date: Feb 2007
Location: kent
Posts: 13
Default

thanks ill look into it
__________________
EC 450 FSE
Reply With Quote
  #8  
Old 03-29-2008, 06:46 PM
mike989 mike989 is offline
Senior Member
 
Join Date: Jul 2006
Location: Southern Nevada
Posts: 126
Default

Pond
I've got an 03 as well. When the bike is cold I open the throttle, about half, hit the starter button for a count of two, close the throttle to the fast idle stop and hit the button. Nine times out of 10 it will start and settle into a pleasent high idle.
I've done the starter gears, and the 04 exhaust cam. I haven't done the manual cam tensioner.
If you buy the software get it for a laptop.
__________________
04EC300
04Wild450
07FSR450
Reply With Quote
  #9  
Old 07-20-2008, 08:43 AM
dan j dan j is offline
Member
 
Join Date: Jul 2008
Posts: 5
Default

just been reading your probs seem to have sim probs i have fse 400 02 upgraded starter gears new starer bushes bike does start after a lot of trys and have to use car batt as it will run new bat flat coming to the end of my patience and money any info whould be greatful and likewise cheers dan
Reply With Quote
  #10  
Old 07-21-2008, 07:44 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Order the VDSTS Standard from Technoresearch. For $195 you get the software and interface cable. This is good for the family of Magnetti Marelli ECU used in the FSE, not locked to one ECU or PC, so more than one guy can share. You can adjust trim, reset TPS, and all diagnostics. I got it for my Ducati, works well.

If your in a jam a local Ducati dealer should be able to help you out as the pro versions they use interface will all the Magnetti Marelli ECUs.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
(OT) Photo Editing Software Rick General Discussions & Announcements 4 12-07-2008 08:38 AM
Feedback on new Photo Gallery software webmaster GasGas Member Polls 12 09-15-2006 10:55 PM




All times are GMT -5. The time now is 12:47 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org