which carb?

[sweeper]

Id like to confirm some of the info Ive been digging up with some practical experience.So any imput from users would be appreciated.

1999 ec 200 which stock carb?
2000 xc 250 which carb?

Ive been playin with my gasser project and would like to know if the 200 carb will work for the 250.Ive gotten some information and Id like to confirm it with some users.Jetting Im not worried about.

Picked up a bent but not broken 2000 xc 250 from Bowhunter and have decided to put the 99 200 parts on the 2000 250 which doesnt have the stock carb and go with it.

Thanks again Bowhunter the bike is sweet,and should be rollin again soon.

[Rick]

99 EC 200 - 38mm PWK

As for 2000 XC 250 should be the same.

[sweeper]

Thx Rick.
Thats what Ive been getting when I search.But the earlier gasser stuff isnt always that clear.

What are your jetting numbers on the 99 200?

[Rick]

178m
40p
LTR needle
Slide 6
AC 1.5 / 1.75 turns out

Please keep in mind...I tend to jet FAT as I like it smooth from bottom to mid.
My pipe is a Messico.....with a little cut out of the head section = same effect as over size power valve cover...but on steroids
Squish mod & a little bit of advance timing =
2k3