Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-19-2019, 10:21 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default EC 300 2018 Starter motor

Hi guys,

Can this motor work on my gasser?

https://www.ebay.com/itm/Starter-Mot....c100005.m1851

It seems to me that the original part is currently unavailable.

Regards.


Reply With Quote


  #2  
Old 07-19-2019, 08:15 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

They appear to be the same, I was told they were but have not been able to confirm myself. You could always be the test dummy!
You will have to confirm rotation direction, spline size and length and if the mounting tab is in the correct location.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #3  
Old 07-20-2019, 12:18 AM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

I?ve used them before, they work well for the money.
At 240 hrs I opted to re-brush my own starter on the GP with crf450x brushes filed down to the correct dimensions and soldered on to the existing braid.
I?ve done this to multiple katos and a few gassers in the past.
Make sure to run a mark from end to end including the center barrel and reinstall with the marks lining up with one another so that the starters timing is in the factories optimum position.
$18 fix!
Get on it.
__________________
2011 TXT300R
2018 EC300GP
Reply With Quote
  #4  
Old 07-20-2019, 05:26 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 170
Default

If you are in the USA, Slavens Racing sells brush kits for the KTM starters and there are videos on how to strip the starter and refurbish it. You should be able to identify if your starter is the same from these.

You could always take your starter to your local KTM dealer and do a like for like comparison.
Reply With Quote
  #5  
Old 07-22-2019, 04:31 AM
eralha eralha is offline
Senior Member
 
Join Date: Sep 2018
Posts: 103
Default

Thanks guys, i think i will give it a try, for the price its not bad.

I will give an update when i have more information.
Reply With Quote
  #6  
Old 08-06-2019, 03:50 AM
coxy321's Avatar
coxy321 coxy321 is offline
Member
 
Join Date: Mar 2017
Posts: 1
Default

I put a brush set in my OEM starter (18 EC300), but it turns out the windings were completely cooked. Local GG dealer quoted me $420 for a replacement starter along with some ridiculous wait time. Ended up ordering this one linked below which fitted fine but rotated the wrong way - easy fixed by reversing the motor housing.

Starter: https://www.ebay.com.au/itm/KTM-Husq...72.m2749.l2649

Brushes: https://www.ebay.com.au/itm/KTM-Husq...72.m2749.l2649
Reply With Quote
  #7  
Old 08-06-2019, 05:06 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

I'm afraid both links points to the same item
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Starter (Motor) Question farmerj Enduro Electrical & Wiring 8 10-19-2020 01:25 AM
Starter motor mikethebike1127 Enduro Electrical & Wiring 2 12-09-2017 06:48 PM
Can a starter motor get weak Mostin3 Enduro Electrical & Wiring 8 10-17-2017 02:41 PM
starter motor pigpen966 Enduro Electrical & Wiring 1 08-30-2016 01:56 PM
04 starter motor pondmore Enduro Engine 4 stroke (including EFI & Exhaust) 2 06-23-2007 04:56 AM




All times are GMT -5. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org