Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-14-2009, 07:54 PM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default which reeds/cage are best for ec200 2000?

i have a boyesen dual stage reed setup now. broke a reed in the woods. so, i'm looking to replace - what works best ??
i'm assuming replacement reeds are RAD-34C and not psr-21 right??



Last edited by stainlesscycle; 08-15-2009 at 11:21 AM.
Reply With Quote


  #2  
Old 08-15-2009, 04:56 PM
stay_upright's Avatar
stay_upright stay_upright is offline
Senior Member
 
Join Date: Jan 2008
Location: Coventry UK
Posts: 460
Default

I've just ordered some more as mine were cracked a bit - I went for the Boysen carbon fibre dual stage ones mostly as I was happy with the way my bike worked before so just want the original power back.

The info I seemed to gather about reeds indicated you can trade low end performance for top end with the different reeds, I think the stockers are a balance, you'd have to do a bit more research if you wanted better performance at either end.

My KTM had C/F reeds and they lasted a lot of years with no wear, however I notice my boysens it's the bottom reed which broke and on the C/F ones only the top reed is C/F so I'm not expecting them to last any longer than the plastic set though the price was reasonable and that's what my local shop normally use so I went with them...
__________________
'05 Gas Gas 300
'97 Aprilia Pegaso 650
'99 KTM 200
'95 ish XR630 (died many times in Oz)
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
EC200 kick start lever (2000 model) sireid Enduro Chassis & Body 11 01-24-2010 02:56 AM
EC200 Reeds geoff g Enduro Intake/Carburetion - 2 stroke 2 08-12-2009 05:17 PM
Reed cage removal skid jackson Enduro Engine - 2 stroke 6 03-26-2008 10:26 PM




All times are GMT -5. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org