|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Will a CRF front fender fit gasgas triple clamps?
Im interested in changing to a front fender that doesnt require a fender brace, and then putting the slick crf number plate on.
So just wondering if the new era 09,10,11 crf front fender fits with or without modification. |
#2
|
||||
|
||||
The 2009 Crf450 front fender fits nicely on the 2011 models. You have to egg out the holes just a little but other than that it matches up real nice. We kept breaking the front fender in cold weather thats why we made the switch. I couldn't tell you whether it would fit the older models. From the looks of pictures of the older models I don't believe they have a stepped fender like the 2011 model does.
|
#3
|
||||
|
||||
So it fits and doesnt hit the pipe or frame or wheel? I know that you could make any front guard fit with mounting options, just nice to not have to modify much.
Also, it doesnt need a fender brace? |
#4
|
||||
|
||||
The 2011front fender won't fit the older bikes.
There are two bolts that go into the bottom of the triple clamp and two more that bolt into a separate bracket at the front of the triple clamp. The 2010 front fender will fit the older bikes, it has a deep v in the middle that stabalizes the fender without a brace. |
#5
|
||||
|
||||
So the Honda guard wont fit because the 2011 gg mounts are different to previous years?
|
#6
|
|||
|
|||
Every UFO front fender I have ever ordered hasn't had the holes pre-drilled. I mounted a newer style Yama front fender on my 97 EC250. Just line up or measure the old fender holes, drill and mount. I did have to nick a little off the bottom for it to clear my pipe, but you cant even tell.
I just finished putting 2001 WP(USD) forks on today and the holes lined up from the zokes triple to the WP triple. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Torque value for Triple Clamps? | binsel | Enduro Suspension | 7 | 03-21-2011 08:42 AM |
Can I swap Triple clamps and front forks? | FFRDave | Enduro Chassis & Body | 2 | 05-24-2010 02:32 PM |
Milling out triple clamps? | Cruiser | General Discussions & Announcements | 3 | 01-20-2010 08:53 PM |
Bitchin' triple clamps available?! | robinator | Enduro Suspension | 0 | 05-08-2009 09:43 PM |