Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-21-2017, 12:14 PM
jeremy358 jeremy358 is offline
Member
 
Join Date: Mar 2017
Posts: 3
Default 2011 ec300 rectifier

Hello. I had two out of the four wires pull out of the plastic 4 pin connector that plugs into the rectifier. I don't want to mix them up and chance shorting the cdi. Can anyone tell me the order of the wires?! Thank you!! 2011 ec300

Right now I have -red wire/black stripe (on the one end)
-next is white wire
-yellow wire/green stripe. (Pulled out of connector)
-yellow wire. (Pulled out of connector)

Thanks!!!
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rectifier for horn? k1322 Enduro Electrical & Wiring 1 11-02-2014 03:23 PM
2013 EC300 E - GasGas Fan Rectifier/Regulator FDB Enduro Electrical & Wiring 2 10-25-2014 02:10 PM
do i need a rectifier? hotrod Enduro Electrical & Wiring 1 07-25-2012 05:16 PM
Regulator/Rectifier Needed hudson_hollow Other GasGas Bikes/Quads 3 05-27-2008 10:33 PM




All times are GMT -5. The time now is 04:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org