Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Announcements

Enduro Product Announcements Announce new gasgas enduro products here - Vendors Welcome...


Reply
 
Thread Tools Display Modes
  #1  
Old 06-04-2009, 02:34 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default Hammerhead Designs GG shifter

http://www.hdmoto.com/ProductDetails...uctCode=GGTMSL

Very cool. Price ($70) not too horrible for billet stuff.

Not sure of the length. Different tip sizes.



Reply With Quote


  #2  
Old 06-04-2009, 03:28 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

I have one and it is longer, plus you can order tip to give you more room. I also got the long tip.

Issue:

1. Bent on first ride. Hit a wet root and the bike layed right down on that side.
2. The knurling on the tip is wearing fast.
3. I safety wired the tip, just in case.

With that said, it is still way better than the stock shifter and I would buy it again.
__________________
2004 GasGas DE250
Reply With Quote
  #3  
Old 06-04-2009, 03:29 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Here is a pic of mine on my bike

__________________
2004 GasGas DE250
Reply With Quote
  #4  
Old 06-04-2009, 04:05 PM
blitz11's Avatar
blitz11 blitz11 is offline
Silver Level Site Supporter
 
Join Date: Oct 2006
Location: SW Montana
Posts: 702
Default

+1. I have size 14 feet, and the Hammerhead works great. I've worn the anodization off of the tip, but i can always get a new tip cheap. I put one on my daughter's KTM 200, (her feet are big for a 14 year old girl), and it really made a big difference in her ability to find neutral.

Great products.

blitz
Reply With Quote
  #5  
Old 06-04-2009, 04:57 PM
sierrarider's Avatar
sierrarider sierrarider is offline
Senior Member
 
Join Date: Nov 2007
Location: Carson City, NV
Posts: 123
Default

For some reason, when I ordered one from GoFasters, they charged me $90 plus $10 for shipping

UPDATE>>> Mark has looked into it and credited my account the difference.
__________________
Jon
'05 GG 300 DE (race bike)
'06 KTM 450 XC (dual sport & supermoto)
'09 GG 280 TXT (to learn on)
'02 BMW R1150RT (for racking up the miles)
Four wheels move the body, two wheels move the soul
If everything seems under control, you're not going fast enough

Last edited by sierrarider; 06-05-2009 at 11:41 AM.
Reply With Quote
  #6  
Old 06-04-2009, 09:20 PM
Skidad's Avatar
Skidad Skidad is offline
Senior Member
 
Join Date: Dec 2007
Location: Littleton Massachusetts
Posts: 1,209
Default

Quote:
Originally Posted by sierrarider View Post
For some reason, when I ordered one from GoFasters, they charged me $90 plus $10 for shipping
I'm sorry but that's WAY to much. $70 direct from Hammerhead (HD Moto)

They have a new rubber tipped version now as well.

http://www.hdmoto.com/SearchResults.asp?Cat=26

__________________
07 EC 300 (under 500 miles, selling soon)
97 KTM 250 EXC (sold)
2016 Trek Remedy 29er
Reply With Quote
  #7  
Old 06-05-2009, 01:44 AM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

Most importantly does it stay tight on the selector shaft?
Reply With Quote
  #8  
Old 06-05-2009, 04:49 AM
blitz11's Avatar
blitz11 blitz11 is offline
Silver Level Site Supporter
 
Join Date: Oct 2006
Location: SW Montana
Posts: 702
Default

Mine Has. I installed it in Sept. Last year with a bit of blue loctite, and i've had no need to tighten it since.
Reply With Quote
  #9  
Old 06-05-2009, 05:07 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

I have had to retighten mine a few times. I may try some blue loctite too.
__________________
2004 GasGas DE250
Reply With Quote
  #10  
Old 01-24-2010, 08:47 AM
Ud_luz's Avatar
Ud_luz Ud_luz is offline
Senior Member
 
Join Date: Feb 2007
Location: Sierra Vista, Arizona
Posts: 395
Default

Quote:
Originally Posted by eff View Post
I have had to retighten mine a few times. I may try some blue loctite too.
I have one of the prototypes. I finally installed a longer bolt and put a jamb nut on the end to lock the bolt in.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hammerhead shifter steve Enduro Product Reviews 0 02-04-2009 05:32 AM
RB Designs Carb Mod Magellan Enduro Product Reviews 18 06-11-2008 01:44 PM
Thanks to RB Designs & Gofasters ejas General Discussions & Announcements 0 09-07-2007 05:10 AM
RB Designs Carb Mod? Boomhauer Enduro Intake/Carburetion - 2 stroke 4 03-20-2007 03:09 PM
Welcome RB Designs... webmaster General Discussions & Announcements 2 07-20-2006 08:37 AM




All times are GMT -5. The time now is 07:59 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org